
Written by Bruce Zhou
Founder & Managing Director | JOTA Machinery
Paper converting machinery specialist since 2002.
Connect with me on LinkedIn
Published: 05,November, 2026
Last Updated: 05,November, 2026 10:19:21 AM GMT+8
A thermal paper converter wants to print a company logo on the reverse side of a jumbo roll before slitting and rewinding it into POS receipt rolls.
The artwork contains black text, fine lines and a small solid area.
The converter has several anilox rollers available, including 400 LPI, 500 LPI and 600 LPI engravings. Each roller has a different cell volume.

Which one should be used?
Selecting an anilox roller for thermal paper flexographic printing involves more than choosing the highest line screen. The roller must deliver enough ink to achieve the required color density while maintaining clean text, sharp image edges and reliable drying.
Too little effective ink transfer can produce weak printing or incomplete coverage. Excessive ink laydown can cause filled-in lettering, dirty print and ink set-off during rewinding.
Thermal paper also introduces another requirement: the printing and drying process must preserve the paper’s heat-sensitive recording properties.
This guide examines how to select anilox line screen, cell volume and engraving geometry for different thermal paper printing applications.
What Makes Anilox Selection Different for Thermal Paper?
Thermal paper contains a heat-sensitive recording layer that develops an image when exposed to thermal energy from a printhead.
The paper may also contain a precoat, protective topcoat or backside coating, depending on the grade.
For many receipt paper applications, flexographic artwork is printed on the reverse side of the web. This allows the thermal recording surface to remain available for printing variable information in the POS terminal.

Typical pre-printed artwork includes:
- Company logos
- Retail branding
- Promotional text
- Fixed barcodes
- Decorative lines and color panels
- Repeated information across the jumbo roll
The appropriate anilox specification depends on the printed design and the surface characteristics of the selected thermal paper.
A large solid logo requires a different ink film from fine text or halftone artwork.
The ink formulation and drying conditions also need to be suitable for the paper grade.
Therefore, the anilox should be selected to deliver the required print quality with a controlled ink film, rather than simply maximizing ink transfer.
1. Understanding Anilox LPI and BCM
Two specifications are particularly important when selecting an anilox roller.
Anilox Line Screen (LPI)
LPI stands for Lines Per Inch.
It describes the number of engraved cell lines per linear inch on the anilox surface.
A higher LPI generally means smaller, more closely spaced cells.
A lower LPI generally means larger cell openings.
Higher line screens are commonly associated with fine-detail printing, while lower line screens can accommodate the greater cell volumes used in heavy solids and coatings.
However, the line screen alone does not determine how much ink is transferred.
Anilox Cell Volume (BCM)
BCM stands for Billion Cubic Microns per square inch.
It measures the nominal ink-carrying capacity of the engraved cells per unit area.
The equivalent metric unit is cm³/m².
1 BCM ≈ 1.55 cm³/m²
For example:
| Cell Volume | Metric Equivalent |
|---|---|
| 1.5 BCM | 2.33 cm³/m² |
| 2.0 BCM | 3.10 cm³/m² |
| 2.8 BCM | 4.34 cm³/m² |
| 3.5 BCM | 5.43 cm³/m² |
| 4.0 BCM | 6.20 cm³/m² |
| 5.0 BCM | 7.75 cm³/m² |
These values describe the engraved cell capacity, not the actual ink quantity deposited on the paper.
The amount transferred depends on cell geometry, ink properties, plate characteristics, doctoring and printing conditions.
Why LPI and BCM Must Be Selected Together
An anilox roller with a high line screen typically has smaller cell openings.
To provide the required volume, the engraving must have an appropriate cell profile.
Two rollers with the same LPI can have different BCM values.
Likewise, two rollers with the same BCM may deliver different amounts of ink because their cell geometry and line screens differ.
For thermal paper printing, this means a 600 LPI roller cannot be assumed to produce a thinner ink film than every 400 LPI roller without checking their actual volumes.
The complete engraving specification must be considered.
2. How to Select Anilox LPI and BCM for Thermal Paper Artwork
Most thermal receipt roll printing jobs use fixed text, linework, customer logos or relatively simple spot-color graphics.
Other applications may require halftones, fine gradients or larger solid areas.
The following table provides illustrative combinations to evaluate during press trials. These are not certified thermal paper specifications or verified settings for a particular JOTA printing unit.
| Printing Application | Candidate LPI | Candidate BCM | Main Requirement |
|---|---|---|---|
| Fine text and detailed linework | 500–800 | 1.5–2.5 | Fine edges and controlled ink film |
| General text and simple graphics | 400–600 | 2.0–3.5 | Balanced coverage and detail |
| Small solid logos and spot-color areas | 300–500 | 3.0–5.0 | Sufficient solid ink density |
| Larger solid areas | 250–400 | 4.0–6.0 | Uniform coverage and suitable drying |
The combinations should be reviewed against the ink supplier’s recommendations and actual printing results.
A high-strength ink may achieve the required density with a lower cell volume than another ink of the same nominal color.
The printing plate and substrate also influence ink transfer.
Fine Text, Fixed Barcodes and Linework
Small characters and narrow lines require controlled ink deposition.
If the ink film is excessive, letter openings may fill in and line edges may appear heavy.
A relatively fine anilox engraving with a controlled cell volume can help maintain clean image edges, provided sufficient color strength is achieved.
For printed barcodes, the operator should inspect bar-width accuracy, edge definition, contrast and actual scanner performance.

A barcode that looks visually dark is not necessarily readable or compliant with the intended barcode specification.
Fixed flexographic barcodes and variable batch codes are different applications. Flexographic plates reproduce repeated, fixed artwork. Variable codes normally require a suitable digital or inkjet coding system.
General Text and Logos
For ordinary branding, the printing plate may contain both solid and fine image areas.
The selected anilox must provide enough ink for the logo without filling small text or reverse details.
A moderate cell volume may be appropriate, but it should be established through a printing trial rather than selected from LPI alone.
Large Solid Areas
Large solid blocks require sufficient ink transfer to achieve the target solid ink density (SID).
An insufficient ink film may cause weak density, pinholing or uneven coverage.
However, increasing BCM too far may produce heavy ink deposits and drying problems.
The objective is to achieve the specified solid coverage using the lowest suitable ink film.
If the required color cannot be achieved with reasonable ink coverage, the ink’s color strength should be reviewed before continually increasing anilox volume.
3. How Does Anilox LPI Affect Fine Printing Details?
Fine text and halftone printing place different demands on the engraved cell structure.
In halftone work, the anilox must adequately support the smaller raised printing dots on the photopolymer plate.
If the cell openings are too large relative to the minimum dot dimensions, ink transfer can become inconsistent.
This may contribute to dot bridging, dirty highlights or unstable tone reproduction.
Anilox-to-Plate Screen Ratio
For conventional screened flexographic printing, a starting guideline is an anilox line screen approximately five to six times the printing plate’s halftone screen ruling.
For example:
| Plate Screen Ruling | Anilox at 5:1 | Anilox at 6:1 |
|---|---|---|
| 100 LPI | 500 LPI | 600 LPI |
| 120 LPI | 600 LPI | 720 LPI |
| 133 LPI | 665 LPI | 798 LPI |
This relationship applies to screened artwork.
It should not be used automatically for solid logos or unscreened text.
The correct anilox-to-plate ratio also depends on the minimum printable dot, plate imaging system and engraving geometry.
For thermal paper jobs containing simple spot-color logos without halftones, effective ink volume and image definition may be more important selection factors than this ratio.
4. What Anilox Cell Geometry Is Suitable for Thermal Paper Printing?
Cell geometry influences how ink fills and leaves the anilox engraving.
60-Degree Hexagonal Engraving
The 60° hexagonal cell pattern is widely used in flexographic printing.
Its cell arrangement provides closely packed engraving geometry and is suitable for a broad range of ink-metering applications.
Laser-engraved ceramic anilox rollers using this geometry are common in modern flexographic equipment.
For thermal paper printing, a 60° hexagonal engraving is a reasonable candidate when the required LPI and BCM can be achieved with suitable cell depth and ink-release characteristics.
However, it is not the only possible engraving.
Alternative Engravings
Elongated cells and channel-type engravings are also available.
These may provide advantages for certain ink formulations, coatings or specific ink-transfer requirements.
They should be evaluated according to the anilox supplier’s recommendations and the required printing result.
Cell Depth and Opening
Cell depth affects nominal ink capacity, while cell opening and geometry influence how efficiently the ink is released.
A very deep cell may retain ink instead of transferring it effectively.
It may also be more difficult to clean.
A shallow cell may not provide sufficient volume for a particular printing application.
This is why requesting an anilox specification should involve more than simply stating the LPI.
The supplier should confirm the cell volume and intended engraving geometry.
5. Matching the Anilox Roller with Thermal Paper Printing Ink
Thermal paper can be pre-printed using compatible water-based or UV-curable flexographic inks, depending on the paper grade and press configuration.
The ink system affects the appropriate anilox selection.
Water-Based Flexographic Ink
Water-based inks are used for suitable thermal paper applications.
Their transfer characteristics depend on the pigment concentration, binder formulation, viscosity, surface tension and other properties.
The anilox must supply enough ink to achieve the required color without unnecessary film thickness.
A higher BCM is not automatically necessary simply because the ink is water-based.
A strongly pigmented water-based ink may achieve the desired density using a relatively low-volume engraving.
The ink supplier’s recommended viscosity, pH and dilution conditions should be followed.
UV-Curable Flexographic Ink
Some thermal paper grades are compatible with selected UV flexographic inks.
However, UV curing introduces additional considerations involving photoinitiator chemistry, ink adhesion, curing energy and thermal exposure.
The anilox should be matched to the ink’s transfer characteristics and the required cured film.
A low-volume anilox should not automatically be selected solely because the ink is UV-curable.
The suitability of the complete ink and curing system must be confirmed for the specific thermal paper.
Ink Adhesion and the Printed Surface
Thermal paper grades differ in surface structure.
Some topcoated recording surfaces have relatively low ink absorbency, while other paper surfaces may absorb ink more readily.
The reverse side may also have a coating designed to improve printability.
An anilox cannot correct an ink formulation that does not wet or adhere properly to the selected surface.
Before changing the anilox volume, confirm that the ink is approved for the printing side and the particular thermal paper grade.
6. Why Ink Film Thickness Matters During Thermal Paper Drying
One of the main concerns in thermal paper flexographic printing is drying the ink without affecting the heat-sensitive recording properties.
A heavier ink film generally places greater demands on the drying system.
If the ink is not adequately dried before rewinding, several problems may occur.
Ink Set-Off
Ink set-off occurs when ink transfers from a printed surface onto another surface during contact.
During rewinding, insufficiently dried ink may transfer between adjacent layers of the web.
This can contaminate the thermal recording surface or damage the appearance of the pre-printed artwork.
Blocking
Blocking occurs when adjacent layers stick together.
Depending on the ink and winding conditions, inadequate drying or curing can contribute to this problem.
Unwanted Thermal Discoloration
Thermal paper can develop unwanted background discoloration after inappropriate thermal exposure.
This is particularly important when drying equipment is used near the recording layer.
However, there is no universal dryer setpoint of 70°C that applies to all thermal paper grades.
The temperature displayed on the dryer is not necessarily the same as the actual paper web temperature.
The result also depends on exposure time, airflow, heat transfer, coating sensitivity and web speed.
Drying conditions should be qualified using the actual thermal paper and ink system.
How Can Anilox Selection Help?
Using an appropriate anilox volume can reduce unnecessary ink deposition.
A controlled ink film may be easier to dry or cure while maintaining the required print appearance.
However, simply reducing BCM is not a complete drying solution.
The drying system, ink formulation, airflow and web-handling conditions must also be suitable.
For thermal paper, post-print evaluation should include both print quality and the paper’s ability to develop a normal thermal image in the intended printer.
7. Choosing Anilox Rollers for a New Thermal Paper Flexo Printing Unit
When specifying a new printing unit, the number and type of anilox rollers should be based on the actual production range.
A converter printing only simple, single-color logos may not need the same anilox inventory as one producing detailed graphics or multicolor artwork.
It can be useful to evaluate several engravings during machine commissioning.
For example, the following are possible trial candidates, not a standard supplied anilox set:
| Candidate Anilox | Printing Job to Evaluate |
|---|---|
| 600 LPI / 2.0 BCM | Fine text and detailed linework |
| 500 LPI / 2.8 BCM | General logos and combination artwork |
| 400 LPI / 3.5–4.0 BCM | Spot-color areas and heavier linework |
These combinations should not be treated as guaranteed compatible specifications.
The selected ink may require a different volume, and the engraving manufacturer must confirm that the requested LPI and BCM can be produced with a suitable cell profile.
A converter may find that two qualified rollers cover most of its artwork, while another operation requires additional engravings.
The inventory should follow the production requirements.
Information to Provide Before Selecting an Anilox
Before ordering or specifying the roller, prepare:
- Printing artwork and color separations
- Required printing colors
- Thermal paper grade and printing side
- Ink formulation and supplier
- Plate material and screen ruling, if applicable
- Minimum line or text dimensions
- Target solid ink density or approved color standard
- Printing speed and drying configuration
- Anilox dimensions and mounting requirements
This information gives the anilox and ink suppliers a technical basis for recommending suitable engravings.
8. How to Conduct an Anilox Printing Trial on Thermal Paper
A controlled trial is the most reliable way to determine whether the anilox is suitable for a particular thermal paper printing application.
Step 1 — Prepare the Actual Thermal Paper
Use the grade intended for production.
Confirm the paper’s recording surface and approved flexographic printing side.
Record the paper supplier, grade and relevant lot information.
Step 2 — Confirm the Ink Specification
Use the ink recommended for the selected thermal paper.
Check the supplier’s required preparation and operating parameters.
Step 3 — Inspect the Anilox
Confirm the roller identification, engraved LPI, nominal BCM and cell geometry.
Check for contamination, plugging or visible damage.
Step 4 — Establish Impression
Set the anilox-to-plate and plate-to-substrate impression according to the press manufacturer’s procedure.
Use minimum effective impression while maintaining uniform ink transfer.
Excessive impression should not be used to compensate for insufficient ink film.
Step 5 — Print the Test Artwork
The test artwork should contain the elements relevant to the production job.
These may include:
- Solid color patches
- Small text
- Fine lines
- Reverse lettering
- Fixed barcodes
- Halftone patches, where applicable
Step 6 — Check Print Quality
Examine the printed samples for color, density, uniformity and image definition.
A densitometer or spectrodensitometer may be used where appropriate.
For fixed barcodes, evaluate the printed result using the required scanning or verification method.
Step 7 — Verify Drying and Ink Adhesion
Check whether the ink has dried or cured adequately under the intended operating conditions.
Evaluate set-off, blocking, rubbing and adhesion where required.
Step 8 — Check Thermal Recording Performance
Use the printed paper in the intended thermal printer or an appropriate test system.
Confirm that the recording layer still develops the required thermal image without unacceptable background discoloration or image degradation.
If several anilox specifications meet the requirements, select the combination that delivers adequate color and coverage without unnecessary ink film thickness.
9. Common Anilox-Related Printing Problems on Thermal Paper
The appearance of the defect should guide troubleshooting.
| Printing Defect | Possible Causes | What to Check |
|---|---|---|
| Weak logo density | Insufficient effective ink volume, weak ink color strength | BCM, anilox cleanliness, ink |
| Uneven solid coverage | Poor ink transfer, wetting or substrate variation | Ink, plate, substrate and impression |
| Small text fills in | Excessive ink film or impression | Anilox volume, plate and impression |
| Fine lines appear heavy | Ink spread, incorrect impression | Ink properties, BCM, plate |
| Pinholes | Poor wetting, contamination or incomplete transfer | Ink, paper surface, anilox and plate |
| Ink set-off during rewinding | Insufficient drying or excessive ink laydown | Ink film, drying, winding conditions |
| Printed image becomes lighter during production | Cell plugging or changes in ink condition | Actual anilox condition, ink |
| Unwanted thermal discoloration | Excessive thermal exposure or incompatibility | Drying process and paper grade |
| Ink adhesion failure | Ink-substrate incompatibility or unsuitable curing | Ink, paper surface, drying/curing |
These are possible causes rather than definitive diagnoses.
For example, a light solid area does not automatically require a higher-BCM anilox.
The roller may have the correct nominal specification but contain dried ink or contamination inside the cells.
Likewise, heavy text may result from excessive plate impression rather than excessive anilox volume.
The operator should establish the cause before changing the engraving.
10. How to Maintain Anilox Rollers Used for Thermal Paper Printing
Anilox condition can change during service, even when the original specification remains suitable.
Two common causes of reduced effective ink transfer are cell plugging and engraving wear.
Keep the Engraved Cells Clean
Dried ink can accumulate inside the cells and reduce their effective capacity.
Cleaning should follow the anilox and ink manufacturers’ instructions.
Use compatible cleaning chemicals and approved cleaning tools.
The ceramic coating is wear-resistant but can still be damaged by unsuitable mechanical cleaning or mishandling.
Inspect the Engraving
Use suitable magnification to check cell condition.
Look for:
- Dried ink in the cells
- Cell wall damage
- Scoring
- Uneven wear
- Contamination
A microscope inspection can identify visible problems, but quantitative volume measurement may be needed to confirm actual ink-carrying capacity.
Record Anilox Specifications
Maintain a record containing:
| Record | Information |
|---|---|
| Roller identification | Unique roller ID |
| Line screen | LPI |
| Cell volume | Nominal and measured BCM |
| Engraving | Cell geometry |
| Printing application | Approved artwork or ink system |
| Maintenance | Cleaning and inspection history |
| Condition | Wear, plugging or damage |
| Qualification | Approved printing trial or reference sample |
This is especially useful when the same flexographic printing unit handles different customer orders.
A previously qualified print can be reproduced more consistently when the appropriate anilox and operating conditions are recorded.
11. Anilox Selection for Inline Thermal Paper Printing and Slitting
An inline flexographic printing section can be integrated into a thermal paper slitting and rewinding machine when the equipment is configured for that process.
The typical converting route is:
Thermal Paper Jumbo Roll → Unwinding → Flexographic Printing → Ink Drying → Slitting → Rewinding
The printing unit applies the required artwork to the wide paper web.
The slitting section then divides the printed paper into the required finished widths.
For example, a thermal paper converter may produce 57 mm receipt rolls or nominal 80 mm POS rolls from a wider jumbo roll.
If the artwork contains several repeated lanes across the web, the image layout must match the finished roll widths and slitting knife positions.
The anilox roller determines an important part of the ink-transfer condition.
The printing plate determines the reproduced artwork.
The slitting knives control the final paper width.
These operations have different functions and should be checked independently.
A suitable anilox cannot correct an incorrect print-to-slit layout.
Similarly, accurate slitting cannot compensate for unsuitable ink coverage or excessive dot gain.
JOTA Machinery provides thermal paper slitting and rewinding equipment with optional inline flexographic printing configurations.
The appropriate anilox roller should be selected according to the actual artwork, paper grade, ink system and machine configuration.
Conclusion
Anilox roller selection for thermal paper flexographic printing begins with the artwork and the required printed result.
LPI influences the engraved cell pattern and the support of fine printing details.
BCM determines the nominal ink-carrying capacity.
Cell geometry, ink properties, printing plate characteristics and impression determine how effectively that ink is transferred.
For thermal paper, printing quality must also be balanced against suitable drying and preservation of the heat-sensitive recording layer.
A relatively fine anilox with controlled cell volume may be appropriate for fine text and detailed logos, while larger solid areas may require greater effective ink delivery.
However, no single LPI and BCM combination is suitable for every thermal paper printing job.
The most reliable selection is made through documented printing trials using the intended thermal paper, ink and artwork.
For a thermal paper printing and slitting project, JOTA Machinery can review the required printing colors, artwork, jumbo-roll dimensions and finished roll specifications when evaluating a suitable inline converting configuration.
Last Updated on 05/11/2026 by Jota Machinery