bruce-zhou-avator-600x600

Written by Bruce Zhou
Founder & Managing Director | JOTA Machinery
Paper converting machinery specialist since 2002.
Connect with me on LinkedIn
Published: 19,October, 2026
Last Updated: 19,October, 2026 16:20:20 PM GMT+8

A thermal till roll manufacturer receives two printing enquiries.

The first customer wants a black company logo and a return policy printed on the reverse side of an 80 mm receipt roll.

The second customer supplies a logo containing red and blue, with both colours required in the finished print.

Both customers want custom printed thermal paper rolls, but their printing requirements are different.

printed thermal paper rolls

The first order may be produced with a single flexographic printing station. The second may require two stations, provided the artwork is suitable for two-colour spot printing.

This distinction matters when purchasing an inline flexo printing slitting machine.

For thermal paper converters in South Africa, selecting the correct number of printing colours affects equipment investment, printing plate preparation, job setup, ink consumption, maintenance and the range of orders the factory can accept.

A two-colour machine offers more printing options than a one-colour machine, but that does not automatically make it the better investment.

The correct decision depends on what your customers actually order.

What Does One-Colour Flexo Printing Mean?

One-colour flexographic printing uses one printing station to apply a selected ink colour onto the paper web.

For thermal receipt paper, the artwork is commonly printed on the reverse side of the jumbo roll, leaving the heat-sensitive surface available for transaction printing.

single color flexo printing

A one-colour design does not have to be black.

It could use red, blue, green or another agreed spot colour, provided the ink and printing conditions are suitable.

For example, a retailer may request:

  • A black logo and website address
  • A red promotional message
  • A blue company logo
  • A single-colour return policy
  • A repeated store name and contact information

These examples may be suitable for one-colour printing when all elements are intended to use the same ink.

One Colour Can Include More Than One Design Element

A common misunderstanding is that one-colour printing means the machine can print only one logo.

That is not correct.

A flexographic plate can contain several image elements within the approved printing repeat.

For example, a plate may carry a retailer’s logo, website address and return policy using the same ink colour.

The content is determined by the plate design and available printing area.

One printing station does not necessarily mean one printed element.

What About Different Shades?

A single-colour flexographic process may reproduce suitable tints or screened areas using the same ink, subject to the printing plate and equipment capabilities.

However, that does not mean a single station can independently print two different solid spot ink colours.

If a customer requires an accurately specified red logo and blue text, those colours generally require separate ink applications.

This distinction should be explained before preparing the artwork or quoting the order.

When Does a Customer Need Two-Colour Printing?

Two-colour flexographic printing uses two printing stations to apply two inks.

For example, a receipt paper design might contain a red logo and blue promotional text.

Each colour is prepared for its corresponding printing station.

The stations must operate together so that the printed elements appear in the intended positions.

Two Separate Spot Colours

A typical two-colour thermal receipt design may involve:

First station: Red company logo.

Second station: Blue website information or promotional artwork.

The two colours may appear in separate parts of the design, or the artwork may require them to align more closely.

The closer the design elements are to one another, the more important printing registration becomes.

Two Colours Do Not Mean Full-Colour Printing

A two-colour flexographic machine should not be described as a full-colour printing press.

A full-colour photograph or complex multicolour image may require a suitable process-colour or other printing configuration beyond two spot-colour stations.

If a customer provides a multicolour logo, the converter must determine whether it can be reproduced acceptably using the available spot colours.

It may be necessary to simplify the artwork or select a different printing configuration.

The customer should approve any proposed design changes before production.

Spot Colours vs CMYK: Why the Difference Matters

Before choosing a printing machine, it is useful to understand the difference between spot-colour printing and process-colour printing.

Spot-colour printing uses individually selected ink colours. Each spot ink is applied by a dedicated station in a conventional flexographic arrangement.

CMYK process printing uses cyan, magenta, yellow and black to reproduce a wider range of colours through controlled combinations.

Some designs also use additional spot colours alongside process colours.

For many straightforward branded thermal till roll applications, one or two spot colours may be enough.

However, a customer requesting a photographic image or a complex multicolour graphic may require more elaborate printing capability.

The artwork, required appearance and acceptable colour tolerance should determine the printing method.

Manufacturers should not select a press solely because the customer says the logo is “colourful.”

The actual artwork must be reviewed to establish how many inks and stations are needed.

The Hidden Difference: Colour Registration

A one-colour design does not require alignment between multiple printed ink colours.

A two-colour design introduces an additional requirement: the positions of the two colours must be coordinated.

This is called colour registration.

Suppose a logo contains a blue circle surrounded by a red outline.

If the printing stations are not correctly registered, the red outline may shift relative to the blue image.

The defect may be noticeable even when the individual printed colours are clear.

Not Every Two-Colour Artwork Has the Same Registration Requirement

Consider two designs.

In the first design, a red logo appears at the top of the printed repeat and blue text appears some distance below it.

In the second, red and blue elements touch or overlap within the same logo.

The second design may reveal small registration errors more readily.

For this reason, the complexity of a two-colour printing job cannot be determined simply by counting the colours.

The artwork arrangement is also important.

What Should Buyers Ask About Registration?

When evaluating a two-colour inline flexo printing slitting machine, request the relevant registration specification and the conditions under which it applies.

Ask the manufacturer to demonstrate representative two-colour artwork on the intended paper.

The agreed acceptance criteria should reflect the design rather than an arbitrary number taken from another machine model.

Does Two-Colour Printing Cost More Per Roll?

It can, but the additional cost depends on the job.

A two-colour order commonly introduces extra preparation associated with the second printing station.

Depending on the equipment and artwork, this can include:

Cost FactorOne-Colour JobTwo-Colour Job
Ink ColoursOneTwo
Printing PlatesTypically one colour separationTypically two colour separations
Station SetupOne stationTwo stations
Inter-Colour RegistrationNot applicableRequired
Colour ApprovalOne ink colourTwo ink colours
Production InspectionPrint quality and positionPrint quality, position and registration

This does not mean every two-colour job costs twice as much as a one-colour job.

The raw thermal paper, finished roll specifications and much of the downstream converting work may remain the same.

The actual difference depends on plate costs, setup time, ink consumption, artwork complexity, running conditions and order quantity.

For manufacturers, these costs should be calculated from actual production requirements.

A fixed percentage surcharge for every additional colour may not accurately reflect different jobs.

How Order Quantity Changes the Decision

Consider a thermal paper manufacturer that receives regular orders from several retailers.

Most customers request a one-colour company logo and text.

Occasionally, a customer supplies a two-colour design.

Should the factory purchase a two-colour machine immediately?

Not necessarily.

The answer depends on how often those orders occur, their quantities and whether accepting them would justify the additional machine investment.

Scenario A: Mostly One-Colour Repeat Orders

If most of the factory’s printing demand involves a single ink colour, a suitably configured one-colour inline flexo printing machine may satisfy the current production requirements.

The manufacturer can focus on the jobs it actually expects to produce.

However, this limits the ability to accept artwork requiring separate second-colour printing.

Scenario B: Regular Two-Colour Retail Orders

A factory receiving repeated two-colour orders may benefit from having the required printing stations within its own converting line.

This avoids relying on a different production arrangement for those jobs.

But the financial justification still depends on production quantity, achievable selling prices and operating costs.

Scenario C: Frequent Changes Between Customers

A converter handling many different retail logos should pay close attention to changeovers.

The important question is not only how many colours the machine can print.

It is how much time and material are consumed when changing printing plates, ink colours or artwork.

A machine with additional stations does not automatically make frequent order changes faster.

The operator’s procedures and the actual equipment design matter.

Should You Buy Two Colours for Future Expansion?

Buying a higher-specification machine for future demand can be reasonable, but the decision should have a commercial basis.

A new factory may expect to supply several retail chains with printed thermal receipt rolls.

If discussions with potential customers suggest that two-colour designs will form a meaningful part of the order book, the additional capability deserves consideration.

However, future demand should not be treated as guaranteed income.

The converter should distinguish between confirmed orders, recurring customer enquiries and speculative opportunities.

It is also important to ask whether the proposed machine can be upgraded later.

Do not assume that a one-colour machine can automatically accept a second printing station.

Upgrade compatibility depends on the frame, drive system, web path, controls, printing layout and other machine-specific design factors.

Any proposed future upgrade should be confirmed by the equipment manufacturer in writing.

Why Thermal Paper Requires More Than the Correct Colour Stations

The printing section must be suitable for the thermal paper grade.

Receipt paper has a heat-sensitive coating on the side used for transaction printing.

For many custom printed thermal rolls, the flexographic design is applied to the reverse side.

The ink and processing conditions must be compatible with the paper.

Additional printing stations also mean that the web may pass through more printing-related contact and handling points.

The design of the line needs to accommodate the required inks, printing conditions and drying arrangements.

For multi-colour printing, adequate control of web movement also contributes to registration stability.

Buyers should therefore evaluate the complete printing configuration, not just the number of colour stations listed in the machine quotation.

How Printing Colours Affect Inline Slitting and Rewinding

Once printing is complete, the thermal paper must still be converted into finished narrow receipt rolls.

An integrated machine connects printing, slitting and rewinding within one production line.

For a printed 80 mm POS roll, for example, the printing layout must correspond to the final cutting arrangement.

This is true for both one-colour and two-colour jobs.

However, two-colour artwork introduces another inspection requirement: the colours must be correctly registered before the printed lanes are slit.

The finished rolls should be checked for image positioning, colour registration, slitting accuracy and winding quality.

A good print on the full-width web does not guarantee that every finished narrow roll meets the approved specification.

Printing Speed vs Converting Speed

The advertised maximum slitting speed does not necessarily represent the operating speed when printing with two colours.

The practical speed depends on the printing system, drying conditions, registration requirements, paper grade and downstream converting arrangement.

When comparing machine configurations, request actual operating information for the intended number of colours.

For manufacturers producing custom printed thermal paper rolls, the appropriate measure is acceptable finished output—not just web speed.

What Should Be Tested Before Purchasing a Two-Colour Machine?

Factory Acceptance Testing is particularly useful when evaluating printing capabilities.

For a one-colour machine, a suitable test should verify the approved artwork, print clarity, repeat length, ink performance, cutting alignment and finished roll quality.

For a two-colour machine, the test should additionally demonstrate the intended colour registration.

A practical test plan might include:

Artwork sample: Use a design representative of the customer’s requirements.

Ink colours: Confirm the inks to be tested and their compatibility with the paper.

Printing repeat: Verify that the selected cylinder arrangement supports the required repeat.

Registration: Assess the relative position of the two printed colours under agreed conditions.

Slitting alignment: Check the relationship between the printed lanes and finished roll edges.

Finished samples: Inspect the completed thermal receipt rolls after rewinding.

Production operation: Record the actual printing and converting conditions achieved during the test.

The FAT should use acceptance criteria agreed in advance.

If the buyer intends to produce two-colour branded receipt rolls, testing only a simple single-colour logo does not establish the machine’s complete printing capability.

A Practical Decision for South African Thermal Roll Manufacturers

Before selecting a one-colour or two-colour inline flexo printing machine, review your expected customer orders.

The following questions will help establish the required configuration.

QuestionWhy It Matters
Do most customers request one-colour logos?Identifies the main printing requirement
Are two-colour orders recurring?Helps justify additional capability
Do printed colours overlap?Indicates registration requirements
How frequently does artwork change?Affects setup time
What are typical order quantities?Influences cost per saleable roll
Is future expansion confirmed or speculative?Helps evaluate additional investment
What printing repeat lengths are needed?Determines cylinder compatibility
What finished thermal roll sizes are required?Establishes slitting and rewinding needs

The final equipment decision should reflect actual order requirements and verified machine capabilities.

Discuss Your Flexo Printing Requirements With JOTA

JOTA Machinery provides thermal paper slitting and rewinding equipment with inline flexographic printing configurations.

If you’re planning to manufacture branded POS receipt rolls or printed thermal till rolls in South Africa, send us your sample artwork and production specifications.

Our engineering team can review the required printing colours, printing repeat, jumbo paper width and finished roll dimensions before recommending a suitable configuration.

900A-slitter-rewinder-machine-1125x750

Looking to manufacture custom-printed thermal receipt rolls? The JT-SLT-1400P combines flexographic printing, slitting, and rewinding in one production line. It supports branded POS rolls with logos, advertising messages, and other printed artwork, subject to the printing configuration. For manufacturers planning to add printing capabilities to their converting operations, JOTA can help evaluate the required printing colours, finished roll dimensions, and production specifications.

Explore JOTA Thermal Paper Printing and Slitting Machines

Conclusion: Buy the Printing Capacity Your Customers Need

For manufacturers entering the custom printed thermal paper roll market, the number of flexographic printing colours is an important equipment decision.

A one-colour system may be sufficient for many straightforward logo, store information and return-policy printing jobs.

A two-colour system can accommodate artwork requiring two suitable ink colours, but it also introduces additional setup and registration requirements.

The choice should not be based solely on the assumption that more colours mean a better machine.

Printing capabilities, customer order quantities, artwork complexity, changeovers and production costs must all be considered.

For South African thermal paper converters, reviewing actual customer artwork before purchasing machinery is one of the most useful steps in equipment selection.

Looking for an Inline Flexo Printing Slitting Machine?

JOTA Machinery manufactures thermal paper slitting and rewinding equipment with inline flexographic printing options for producing custom printed thermal paper rolls.

If you’re comparing printing configurations, send us your artwork, required number of colours, printing repeat length, jumbo paper specifications and finished roll dimensions.

Our engineering team can review your requirements and discuss a suitable printing and converting arrangement.

Request an Inline Flexo Printing Slitting Machine Quotation

Last Updated on 19/10/2026 by Jota Machinery

Scroll to Top