
Written by Bruce Zhou
Founder & Managing Director | JOTA Machinery
Paper converting machinery specialist since 2002.
Connect with me on LinkedIn
Published: 28,October, 2026
Last Updated: 28,October, 2026 15:57:25 PM GMT+8
Turn over a receipt from a supermarket, restaurant, or retail store. You may find a company logo, promotional message, return policy, QR code, or other information printed on the back.
The transaction details on the front are generated by the receipt printer. However, the designs on the reverse side are usually printed before the thermal receipt rolls reach the retailer.

How does a thermal paper manufacturer produce these custom printed rolls?
One common manufacturing method is flexographic printing, also known as flexo printing.
The process begins with an unprinted jumbo thermal paper roll. The manufacturer prepares the customer’s artwork, transfers the design onto a flexographic printing plate, prints the reverse side of the thermal paper, and converts the printed web into finished receipt rolls.
There are two main production arrangements:
- Flexographic printing on a separate printing press, followed by slitting and rewinding.
- Inline flexographic printing integrated with a thermal paper slitter rewinder.
Both methods can produce custom printed thermal receipt rolls, but the equipment arrangement and production workflow differ.
For thermal paper converters planning to offer branded receipt rolls, understanding the process is important. Printing quality, artwork orientation, ink compatibility, drying, and slitting alignment all affect the finished product.
This guide explains the manufacturing process and the technical details operators should verify before producing custom logo-printed thermal receipt rolls.
1. Which Side of Thermal Receipt Paper Should Be Printed?
Before preparing the artwork or installing a printing plate, the manufacturer must identify the correct paper surface.
Standard direct thermal receipt paper normally has a heat-sensitive coating on one side.
This coating reacts to heat from the POS printer’s thermal printhead, producing transaction details such as product descriptions, prices, and payment information.
The opposite side does not normally have the same thermal imaging function.
That reverse side can be used for preprinted branding when the paper grade and printing materials are suitable.
Front Side: Transaction Printing
The thermal-sensitive side faces the printer’s thermal printhead during normal receipt printing.
The heat-sensitive coating produces the variable transaction information.

This process does not require an ink ribbon or conventional printing ink.
Back Side: Flexographic Logo Printing
The reverse side may carry a preprinted logo, store information, promotional pattern, or other approved artwork.
The artwork is applied at the manufacturing stage using an appropriate printing process.
Flexographic printing is particularly suitable for repeated designs across a moving paper web.

However, the back surface is not automatically compatible with every flexographic ink.
Some thermal papers have specific reverse-side coatings or surface treatments that influence ink adhesion and drying.
The manufacturer should confirm the printable side and ink compatibility with the thermal paper supplier before beginning production.
2. What Equipment Is Used to Print Logos on Thermal Receipt Rolls?
Producing custom printed thermal receipt rolls requires both printing and converting operations.
The printing equipment applies the design to the paper.
The slitting rewinding machine converts the printed jumbo web into the required finished receipt roll widths and diameters.
Route A: Separate Flexo Printing and Slitting
In this arrangement, the factory operates an independent flexographic printing press.
The unprinted jumbo thermal paper is loaded onto the printing machine.
After the required artwork is printed and dried, the web is rewound into a printed jumbo roll or another suitable intermediate format.
The printed material is then transferred to the slitter rewinder.
The slitting machine cuts the paper into narrower strips and rewinds them into finished receipt rolls.
This method separates printing and converting into two production stages.
It may be suitable for manufacturers that already operate printing equipment or need production flexibility across different jobs.
Route B: Inline Flexo Printing, Slitting, and Rewinding
Another method integrates a flexographic printing unit into the thermal paper slitter rewinder.
The unprinted jumbo thermal paper passes through the printing section first.
After the artwork has been applied and appropriately dried, the web moves into the slitting section.

The paper is cut into the required widths and rewound into finished thermal receipt rolls.
This arrangement can reduce intermediate material handling between the printing and converting operations.
However, the printing and rewinding processes must be coordinated.
The suitable production speed and operating sequence depend on the actual equipment configuration.
Which Method Should a Manufacturer Choose?
| Production Consideration | Separate Flexo Printing + Slitting | Inline Flexo Printing + Slitting |
|---|---|---|
| Equipment arrangement | Independent printing press and slitter rewinder | Integrated printing and converting line |
| Intermediate handling | Printed material transferred between machines | Intermediate transfer can be eliminated |
| Production planning | Printing and converting can be scheduled separately | Printing and converting are more closely coordinated |
| Artwork changes | Managed on the printing press | Managed on the integrated printing unit |
| Print-to-slit alignment | Verified across both production stages | Verified within the integrated line |
| Suitable applications | Depends on the existing factory and job mix | Depends on printing requirements and machine configuration |
Neither method should be selected solely because it is described as more automatic.
The appropriate solution depends on the product range, printing colours, artwork requirements, production volume, and available equipment.
3. Prepare the Customer’s Logo for Flexographic Printing
A customer may send a company logo as a PNG, JPEG, PDF, or another digital file.
However, receiving the logo does not mean the artwork is ready for printing.
The design must be prepared for the actual printing process.
Check the Artwork Quality
Whenever possible, request a vector artwork file.
Vector graphics are useful because their shapes can be resized without the same loss of edge definition associated with low-resolution raster images.
If the customer provides only a small image, the artwork may need to be recreated or adjusted before printing plate production.
Small lettering, narrow lines, and detailed symbols should also be reviewed for printability.
Confirm the Printing Colour
Some customers need only one colour.
Others may request two or more colours.
A simple company logo may be suitable for a one-colour flexographic printing unit.
More complex designs require a printing configuration that supports the approved colour requirements.
The number of printing colours must match the actual equipment capabilities.
Determine the Finished Receipt Width
The logo cannot be prepared independently of the finished paper dimensions.
For example, a customer ordering 79 mm receipt rolls has a different available printing area from a customer ordering 56 mm rolls.
The design must fit within the intended print lane, allowing for the required positioning and cutting tolerances.
Approve the Artwork Before Making the Plate
The customer should approve the final artwork, including the size, colour, orientation, and repeat arrangement.
This reduces the risk of producing printing plates that do not match the finished product requirements.
4. How Is the Logo Transferred to a Flexographic Printing Plate?
Flexographic printing uses a relief printing plate to transfer the artwork onto the substrate.
For thermal receipt roll production, the plate carries the repeated logo or other design.
It is mounted on the appropriate printing cylinder or sleeve according to the printing unit.
Step 1: Prepare the Printing File
The approved artwork is converted into a format suitable for the plate-making process.
The layout must consider the required printing dimensions and the printing direction.
Step 2: Manufacture the Printing Plate
A suitable flexographic plate is produced from the approved artwork.
The raised image areas are designed to accept ink during printing.
Plate material, thickness, and other specifications must match the printing system.
Step 3: Mount the Plate
The printing plate is installed on the printing cylinder using the approved mounting arrangement.
Correct positioning is important because the plate determines where the artwork appears on the moving paper.
Step 4: Verify the Printing Repeat
The printing cylinder arrangement determines how often the image repeats along the machine direction.
The logo may appear repeatedly along the receipt, rather than only once on each finished roll.
The actual repeat length depends on the approved artwork and printing-cylinder configuration.
A manufacturer should confirm that the available printing repeat matches the customer’s intended design.
5. Why Printing Repeat Length Matters
A custom printed receipt roll normally contains a continuous length of paper.
The back-side artwork is often repeated at regular intervals along that length.
For example, a retailer may want its logo to appear repeatedly on the reverse side of receipts.
The spacing between repeated designs is called the printing repeat length.
Repeat Length Is Not Finished Roll Length
These two measurements describe different things.
Printing repeat length refers to the interval at which the design repeats.
Finished roll length refers to the total number of metres wound into one receipt roll.
For example, a roll containing 50 metres of paper may have a logo repeated many times along its reverse surface.
The printing repeat does not mean each logo corresponds to one transaction or one receipt.
Actual receipt length depends on the transaction information generated by the POS printer.
Confirm How the Customer Wants the Logo Displayed
Some customers prefer a small logo repeated frequently.
Others want a longer promotional pattern containing a logo, website address, and message.
The printer’s expected paper feed direction also affects the reading orientation.
The artwork should therefore be approved as a complete repeating layout, not simply as an isolated logo.
6. Select the Correct Ink for Thermal Paper Back Printing
Ink selection is one of the most important technical considerations.
Direct thermal paper is designed to respond to heat and may also be sensitive to certain chemicals.
An ink that works well on ordinary kraft paper or another packaging substrate is not automatically suitable for thermal receipt paper.
Water-Based Flexographic Inks
Water-based flexographic inks are used in thermal paper printing applications.
However, their formulations vary.
Some products contain co-solvents or other additives that may be unsuitable for particular thermal coatings.
The manufacturer should request a suitable ink recommendation for the specific paper grade.
UV-Curable Inks
Certain thermal paper grades are compatible with appropriate UV-curable flexographic inks.
Their suitability depends on the paper surface, ink formulation, curing conditions, and printing equipment.
UV curing should not be assumed safe for every thermal paper grade.
Why Chemical Compatibility Matters
During rewinding, the printed reverse side comes into contact with adjacent paper layers.
If the ink is not properly dried or cured, or contains incompatible components, problems may appear during storage or subsequent thermal printing.
Potential problems include ink transfer, unwanted discoloration, or deterioration in printing performance.
Test the Actual Paper and Ink Combination
Before regular production, perform a printing trial using the intended thermal jumbo paper and ink.
Check ink adhesion, rub resistance, drying, storage behaviour, and compatibility with the customer’s receipt printer.
The printing process should not compromise the heat-sensitive side’s ability to produce readable transaction information.
7. How Ink Is Transferred During Flexographic Printing
Once the printing plate and ink have been prepared, the machine can begin the printing process.
The flexographic printing unit normally contains an ink delivery arrangement, an anilox roller, a plate cylinder, and an impression system.
Ink Delivery
The ink supply system delivers printing ink to the anilox roller.
Depending on the printing unit, the ink metering arrangement may use a doctor blade or chambered doctor blade system.
Anilox Roller
The anilox roller contains engraved cells designed to carry a controlled amount of ink.
Its characteristics influence the ink volume delivered to the printing plate.
The correct anilox specification depends on the artwork, ink, and print-quality requirements.
Printing Plate
The plate receives ink from the anilox roller.
Its raised image areas correspond to the customer’s approved design.
Impression
The moving thermal paper passes through the printing nip.
The inked image is transferred from the plate onto the designated paper surface.
The impression pressure must be suitable for the printing plate, substrate, and artwork.
Excessive pressure may produce distorted images or other printing defects.
Insufficient pressure can lead to missing image areas or weak printing.
The objective is consistent ink transfer without unnecessary mechanical pressure on the paper.
8. Drying the Ink Without Damaging Thermal Paper
After the logo has been printed, the ink must reach the required drying or curing condition before the next processing stage.
This is especially important when printing and slitting are integrated into one production line.
What Happens If the Ink Is Not Dry?
Wet or insufficiently dried ink may transfer onto rollers or adjacent paper layers.
Printed logos may become smeared.
The finished rolls may also show set-off, where ink transfers from the printed surface onto another surface during winding.
Why Excessive Heating Is Dangerous
Thermal paper is heat-sensitive.
Excessive drying temperatures or unsuitable exposure conditions can cause unwanted darkening of the thermal coating.
Therefore, the drying system must provide adequate ink drying without damaging the paper.
The appropriate method depends on the ink chemistry and the machine design.
Some inline flexographic printing configurations use infrared and hot-air drying arrangements.
Other printing systems may require different drying or curing equipment.
Validate Drying Under Production Conditions
A sample that looks dry at low speed may behave differently under continuous production.
The factory should confirm drying performance at the intended operating conditions.
Check the printed paper before slitting and inspect the finished rolls after rewinding.
The absence of visible wet ink at the printing unit does not necessarily prove that the material is ready for storage.
9. Align the Printed Logos With the Slitting Knives
One of the most common manufacturing mistakes is preparing the printing artwork without considering the finished slitting layout.
A logo may print clearly on the jumbo web but become incorrectly positioned after the paper is slit into narrow rolls.
Example: Printing Several Lanes Across a Jumbo Roll
Suppose a factory is manufacturing 79 mm printed POS receipt rolls.
The printing plate may contain several parallel columns of repeated artwork across the jumbo paper width.
Each printed column must align with the intended 79 mm finished lane.
If the cutting boundaries are incorrectly positioned, the blade may cut through a logo or leave the image too close to one edge.
The resulting roll can have the correct paper width while failing the customer’s print-layout requirements.
Coordinate Artwork and Cutting Layout
Before plate-making, prepare a combined printing and slitting layout.
The drawing should identify the usable jumbo width, finished lane widths, expected trim, print positions, and cutting boundaries.
The printing artwork should allow for the agreed registration and positioning tolerances.
Remember the Knife Setup
On applicable JOTA Machinery slitter rewinders, operators use 10 mm-wide slitting blades and interchangeable spacers to establish different cutting positions.
The actual knife layout must correspond to the approved printed lanes.
When changing from one finished paper width to another, both the slitting setup and printing layout may need to change.
It is not enough to change the mechanical spacer combination while leaving an incompatible artwork layout installed.
10. Confirm the Logo Orientation Before Full Production
A logo can be correctly printed and correctly centred but still appear upside down on the finished receipt.
This happens when the artwork orientation is not coordinated with the actual paper feed and winding directions.
Follow the Finished Product
The manufacturer should consider how the paper travels through the printing machine, how it is rewound, and how the finished roll will be installed in the receipt printer.
The customer’s intended reading direction should be identified before production.
Use an Actual Receipt Printer for Approval
One practical method is to produce a short sample roll.
Load it into a compatible POS receipt printer and print a test transaction.
Then turn over the receipt and inspect the preprinted logo.
Confirm that the thermal-sensitive side prints correctly and the reverse-side logo has the approved orientation.
This final application test can reveal problems that are difficult to identify from the artwork file alone.
11. Common Problems When Printing Logos on Thermal Receipt Rolls
Even with approved artwork and suitable printing equipment, defects can occur during production.
The following table provides a practical starting point for troubleshooting.
| Printing Problem | Possible Cause | What to Investigate |
|---|---|---|
| Logo appears too light | Insufficient ink transfer, plate or anilox condition | Ink delivery and impression |
| Logo looks blurred | Excessive impression, ink behaviour, plate condition | Printing pressure and ink properties |
| Logo is off-centre after slitting | Incorrect print-to-slit layout or web tracking | Printing registration and knife positions |
| Logo appears upside down | Incorrect artwork or winding orientation | Paper feed direction and sample roll |
| Ink smears after rewinding | Inadequate drying or curing | Drying conditions and ink compatibility |
| Thermal paper turns grey or black | Excessive heat or chemical interaction | Drying exposure and material compatibility |
| Print changes across the web | Uneven impression or ink transfer | Printing-unit alignment |
| Repeated logo spacing is wrong | Incorrect plate or cylinder repeat | Printing repeat specification |
The same visible defect can have several causes.
For example, blurred printing may result from excessive impression pressure, unsuitable ink behaviour, or a damaged plate.
Operators should therefore inspect the affected process before changing multiple parameters simultaneously.
12. Quality Inspection Before Shipping Custom Printed Rolls
The final product must satisfy both ordinary thermal receipt paper requirements and the additional printing requirements.
A visually attractive logo is not enough if the finished roll does not fit the intended POS printer or the thermal coating has been affected.
Logo Appearance
Check image clarity, colour consistency, and the approved design.
Logo Position
Confirm that the artwork is correctly positioned within each slit lane.
Printing Repeat
Verify that the repeated pattern matches the agreed artwork specification.
Ink Adhesion and Drying
Inspect for rubbing, transfer, and other defects using appropriate test methods.
Slitting Width
Measure representative finished rolls against the customer’s required width tolerance.
Winding Quality
Inspect roll firmness, outside diameter, and edge alignment.
Thermal Printing Performance
Load a representative finished roll into a compatible printer.
Verify that the heat-sensitive coating still produces acceptable transaction text.
Packaging
Ensure the finished rolls are packed appropriately for handling, storage, and transportation.
If heat shrink packaging is used, the shrinking conditions must not cause unwanted thermal paper discoloration.
The objective is to deliver a finished roll whose printed logo, dimensions, and thermal printing function all meet the agreed specifications.
13. When Does Inline Flexo Printing Make Sense?
For a thermal paper converter considering custom logo-printed rolls, equipment selection should begin with the nature of the orders.
If the factory already operates a flexographic press, separate printing and slitting may be practical.
If the business plans to manufacture printed thermal receipt rolls regularly, an inline printing and converting configuration may be worth evaluating.
However, not every customer requires the same number of printing colours, artwork changes, or production volume.
Questions to Answer Before Selecting Equipment
What finished receipt widths will you manufacture?
Will most orders use the same logo, or will the artwork change frequently?
How many printing colours are required?
What is the approved printing repeat?
What jumbo paper width will the factory use?
How many slit lanes will be produced simultaneously?
Will the finished rolls require manual or automated downstream packaging?
These details determine the appropriate machine configuration.
A high maximum slitting speed does not guarantee that the integrated printing process can operate at the same speed.
The line must be evaluated under representative printing and rewinding conditions.
14. JOTA Machinery’s Inline Flexo Printing and Slitting Solution
At JOTA Machinery, we manufacture thermal paper slitting and rewinding equipment for POS receipt rolls and other converting applications.
For customers planning to produce logo-printed thermal paper rolls, we also provide inline flexographic printing and slitting solutions.

Looking to manufacture custom-printed thermal receipt rolls? The JT-SLT-1400P combines flexographic printing, slitting, and rewinding in one production line. It supports branded POS rolls with logos, advertising messages, and other printed artwork, subject to the printing configuration. For manufacturers planning to add printing capabilities to their converting operations, JOTA can help evaluate the required printing colours, finished roll dimensions, and production specifications.
In this arrangement, the unprinted thermal jumbo roll enters the printing unit before the slitting and rewinding process.
The printing plate transfers the approved artwork onto the designated surface.
After suitable drying, the paper is slit into the required widths and rewound into finished receipt rolls.
The precise printing configuration depends on the selected machine model and customer requirements.
What Information Do We Need?
If you are considering a custom printed thermal receipt roll production line, provide the jumbo paper width and grade, finished roll dimensions, required printing colours, sample artwork, printing repeat, and expected production capacity.
Our engineering team can review the printing and slitting requirements together.
For example, the layout for 56 mm receipt rolls may differ from the layout for 79 mm rolls.
Both the printing plate arrangement and slitting configuration need to suit the finished product.
A production trial can then be used to verify the artwork, print quality, cutting alignment, and winding performance under agreed conditions.
Explore JOTA Thermal Paper Slitting and Printing Solutions
Conclusion: Back Printing Requires More Than a Logo and a Printing Plate
Printing a logo on the back of a thermal receipt roll is a manufacturing process that combines artwork preparation, flexographic printing, drying, slitting, and rewinding.
The manufacturer begins with unprinted jumbo thermal paper and selects an appropriate printing arrangement.
The customer artwork is prepared for the required finished paper width and printing repeat.
A suitable flexographic printing plate transfers the design onto the reverse surface.
The ink must dry or cure properly without damaging the heat-sensitive coating.
Finally, the printed paper is slit and rewound into finished receipt rolls.
Throughout the process, the printing positions must remain coordinated with the cutting layout and the intended paper feed orientation.
A successful custom printed thermal receipt roll should carry the approved logo while retaining the dimensional accuracy, winding quality, and thermal printing performance expected from a standard receipt roll.
Planning to Manufacture Custom Logo-Printed Thermal Receipt Rolls?
JOTA Machinery provides thermal paper converting equipment, including inline flexo printing, slitting, and rewinding solutions.
Whether you are establishing a new thermal receipt roll factory or expanding from plain rolls into custom printed products, our engineering team can review your intended production requirements.
Send us your jumbo thermal paper specifications, finished roll sizes, printing colours, approved artwork, and estimated production capacity.
We can discuss a suitable equipment configuration for your manufacturing operation.
Contact JOTA Machinery About Inline Flexo Printing and Slitting
Last Updated on 28/10/2026 by Jota Machinery