
Written by Bruce Zhou
Founder & Managing Director | JOTA Machinery
Paper converting machinery specialist since 2002.
Connect with me on LinkedIn
Published: 16,October, 2026
Last Updated: 16,October, 2026 19:09:52 PM GMT+8
Thermal till receipt rolls are used in supermarkets, retail stores, restaurants, petrol stations, pharmacies, and other businesses operating point-of-sale (POS) systems throughout South Africa.
For retailers, receipt paper is an everyday consumable. For manufacturers and paper converters, however, producing these rolls involves much more than cutting paper into smaller widths.
A customer purchasing 80 × 83 mm thermal till receipt rolls expects the paper to fit the printer, produce clear transaction records, and maintain consistent quality across repeated orders.
Two receipt rolls may have the same outside dimensions but contain different paper lengths or perform differently during printing.
For businesses planning to manufacture thermal till rolls in South Africa, understanding these differences is important before purchasing jumbo thermal paper or investing in slitting and rewinding machinery.
This guide examines the applications, paper specifications, manufacturing process, quality requirements, and equipment considerations involved in thermal till receipt roll production.
1. What Are Thermal Till Receipt Rolls?
Thermal till receipt rolls are made from paper coated with a heat-sensitive layer that reacts when exposed to a thermal printhead.
Unlike conventional impact printers, direct thermal printers do not require ink ribbons to produce receipts.
When the printhead applies heat to selected areas of the paper, the thermal coating develops a visible image. This allows the printer to produce transaction details, prices, dates, barcodes, and other receipt information.

In South Africa, these products are commonly called thermal till rolls, thermal receipt rolls, POS rolls, or thermal paper rolls.
Although these terms are often used interchangeably, the finished paper dimensions must always match the intended printer.
Where Are Thermal Till Receipt Rolls Used?
Supermarkets and Retail Stores
Thermal receipt paper is used to print customer purchase records, including item descriptions, prices, payment details, and transaction information.
Restaurants and Hospitality Businesses
Restaurants, cafés, and hospitality businesses use compatible thermal receipt printers for customer bills and payment receipts.
Petrol Stations
Thermal till rolls are used by compatible POS systems to print receipts for fuel purchases and other retail transactions.
Pharmacies and Convenience Stores
These businesses commonly use electronic POS systems that require thermal receipt paper for customer transactions.
Card Payment Terminals
Some payment terminals contain compact thermal printers that use narrower receipt paper rolls.
Self-Service Kiosks
Certain self-service machines use thermal printers to issue tickets, transaction confirmations, and other printed information.
Not every cash register or receipt printer uses thermal paper. Some equipment uses bond paper or alternative printing technologies.
Before manufacturing rolls for a customer, confirm the printer type and required paper specifications.
2. What Sizes of Thermal Till Receipt Rolls Are Used in South Africa?
Thermal till receipt rolls are available in several dimensions to accommodate different POS printers and payment terminals.
Commonly encountered specifications include 57 × 40 mm, 80 × 80 mm, and 80 × 83 mm. Other sizes are used for particular printer models and specialised equipment.
| Thermal Roll Size | Typical Application |
|---|---|
| 57 × 40 mm | Card payment terminals and compact printers |
| 80 × 80 mm | Desktop POS receipt printers |
| 80 × 83 mm | Retail POS receipt printers |
| 57 × 57 mm | Selected receipt printing equipment |
| 57 × 76 mm | Compatible printers requiring larger rolls |
| Custom dimensions | Kiosks, ATMs and specialised printers |
These specifications represent products encountered in the South African market rather than a ranking of national sales volume.
Understanding Thermal Receipt Roll Dimensions
Thermal paper rolls are commonly identified by their paper width and finished outside diameter.
For example:
57 × 40 mm Thermal Roll
- Paper width: 57 mm
- Finished outside diameter: 40 mm
80 × 83 mm Thermal Roll
- Paper width: 80 mm
- Finished outside diameter: 83 mm
These dimensions do not specify the exact length of paper inside the roll.
The finished paper length also depends on paper thickness, core diameter, and winding conditions.
For manufacturers, this means the paper width and outside diameter are only part of the product specification.
The core dimensions, actual paper length, paper GSM, and permitted tolerances should also be confirmed before accepting a production order.
3. Why Can Two Thermal Till Receipt Rolls Have Different Paper Lengths?
One common misunderstanding when purchasing thermal till receipt rolls is assuming that identical outside dimensions always mean identical paper lengths.
This is not necessarily correct.
For example, two finished rolls may both measure 80 mm in width and 80 mm in outside diameter, but one may contain more paper than the other.
The difference can result from variations in paper caliper, core diameter, and winding conditions.
Paper GSM vs Paper Thickness
GSM means grams per square metre. It describes the mass of paper over a defined area.
Thermal receipt papers are available in different grammages, including 48 GSM, 55 GSM, and 65 GSM grades.
However, GSM does not directly indicate paper thickness.
Paper thickness, also called caliper, is commonly measured in micrometres.
A lower-caliper paper can generally accommodate a greater paper length within a given finished roll diameter, assuming comparable core dimensions and winding conditions.
For manufacturers, this affects material consumption, cost per finished roll, and the actual paper length supplied to customers.
How to Calculate Thermal Paper Roll Length
A simplified theoretical roll-length calculation is:
Paper Length = π × (Outside Diameter² − Core Outside Diameter²) ÷ (4 × Paper Thickness)
All dimensions must use consistent units.
This calculation provides a geometric estimate. Actual paper length can differ because of winding compression, air gaps between layers, and manufacturing tolerances.
When purchasing jumbo thermal paper, manufacturers should request the paper supplier’s technical data sheet and verify both GSM and caliper.
The correct paper grade should be selected according to printing performance, customer specifications, and finished roll requirements—not simply the lowest raw material price.
4. What Determines Thermal Till Receipt Roll Quality?
For manufacturers supplying wholesalers, retailers, and POS consumable distributors, consistent product quality is essential.
A thermal receipt roll may have the correct outside dimensions but still cause customer complaints if the printing is unclear, the paper width is inconsistent, or the winding quality is poor.
Several factors influence the finished product.
Thermal Coating Performance
The heat-sensitive coating must respond appropriately to the intended thermal printer.
An unsuitable coating may produce faint or inconsistent printed images.
Manufacturers should evaluate print performance using suitable testing equipment and compatible printers.
Slitting Accuracy
The finished roll width must match the printer’s required paper dimensions.
If the paper is too wide, it may interfere with the printer’s paper path. If it is too narrow, it may cause paper tracking problems.

During production, operators should regularly inspect the slit paper width and cutting-edge quality.
Rewinding Tension
After slitting, the narrow paper webs must be rewound into finished rolls.
Excessive winding tension may produce overly tight rolls. Insufficient tension may result in loose winding or uneven edges.
The correct settings depend on the paper grade, finished roll size, and machine configuration.
Paper Core Specifications
Many thermal till receipt rolls use paper cores.
The core dimensions must be compatible with the customer’s printer and the manufacturer’s rewinding equipment.
Both the inner and outer core diameters should be confirmed.
Packaging and Storage
Thermal paper is sensitive to certain environmental and storage conditions.
Excessive heat, direct sunlight, moisture, and contact with unsuitable chemicals may affect the paper or its printed image.
Finished rolls should be stored and packaged according to the paper manufacturer’s recommendations.
For factories supplying repeat orders, maintaining consistent specifications between production batches is just as important as producing acceptable samples.
5. How Are Thermal Till Receipt Rolls Manufactured?
Thermal till receipt roll manufacturing is primarily a paper converting process.
The manufacturer purchases jumbo thermal paper that has already been coated for direct thermal printing.
A thermal paper slitting rewinding machine then converts the large parent roll into smaller finished receipt rolls.
Step 1: Load the Jumbo Thermal Paper Roll
The parent roll is loaded onto the machine’s unwind stand.
Before starting production, the operator checks the jumbo roll width, outside diameter, core dimensions, and paper condition.
Large jumbo rolls may require suitable mechanical handling equipment or a shaftless unwinding arrangement, depending on their weight and the selected machine design.
The unwinding system controls the material as it enters the slitting section.
Stable web tension and alignment help maintain consistent paper handling during operation.
Step 2: Set the Slitting Width
The cutting positions are adjusted according to the required finished receipt roll width.
On JOTA thermal paper slitting machines using a lower blade and spacer arrangement, operators select and install the appropriate lower slitter blades and spacers along the knife shaft.
For example, one axial assembly arrangement uses:
- One 10 mm lower slitter blade
- Two 20 mm spacers
- One 6 mm spacer
The total assembly width is 56 mm.
Another arrangement uses:
- One 10 mm lower slitter blade
- Two 20 mm spacers
- Two 6 mm spacers
- One 7 mm spacer
- One 10 mm spacer
The total assembly width is 79 mm.
These measurements describe the combined axial widths of the installed components.
The actual finished slitting width must be verified against the knife-edge positions and the machine’s cutting arrangement.
Before beginning full production, operators should confirm that the finished paper width meets the customer’s specification.
Step 3: Slit the Thermal Paper
The moving jumbo paper web passes through the slitting section.
The knives divide the wide paper into narrower strips according to the selected cutting layout.
Knife condition, paper alignment, and cutting setup affect the finished edges.
Poorly maintained blades may cause rough edges, paper dust, or inconsistent cutting results.
Routine inspection and correct knife adjustment are important for maintaining finished roll quality.
Step 4: Rewind the Finished Receipt Rolls
After slitting, the narrow paper webs are rewound into smaller rolls.
The rewinding system controls the paper as the finished diameter increases.
For example, when manufacturing 80 × 83 mm thermal till receipt rolls, the machine must produce the required paper width and finished outside diameter while maintaining suitable winding quality.
Finished roll length, core specifications, and winding settings must be matched to the production order.
Step 5: Inspect and Package the Rolls
After rewinding, the completed rolls are inspected and prepared for packaging.
Typical quality checks include:
- Finished paper width
- Outside roll diameter
- Core dimensions
- Paper length, where specified
- Edge alignment and winding quality
- Thermal printing performance
- Packaging condition
The rolls can then be packed according to customer requirements and prepared for distribution.
6. How Can Manufacturers Reduce Thermal Paper Waste?
Material waste is an important part of thermal till receipt roll manufacturing costs.
Waste may arise from edge trimming, incorrect cutting layouts, damaged paper, machine adjustments, or finished rolls that fail inspection.
For example, consider a 790 mm wide thermal paper jumbo roll.
If the target paper width is 80 mm, a simple theoretical calculation gives:
790 ÷ 80 = 9 complete widths, with 70 mm remaining.
| Item | Width |
|---|---|
| Jumbo Thermal Paper | 790 mm |
| Finished Receipt Roll Width | 80 mm |
| Theoretical Number of Widths | 9 |
| Total Width Used | 720 mm |
| Remaining Width | 70 mm |
This calculation does not include edge trimming, unusable material, or machine-specific cutting requirements.
The practical production layout must be verified against the usable jumbo roll width.
Material Planning
Before beginning production, calculate the cutting arrangement according to the actual paper width and finished roll dimensions.
Knife Maintenance
Inspect slitting knives regularly. Damaged or incorrectly positioned knives can increase waste and reduce cutting quality.
Winding Control
Incorrect winding conditions may produce rolls that fail quality inspection.
Production Scheduling
When producing several receipt roll sizes, grouping compatible orders may reduce unnecessary machine changeovers.
For manufacturers handling large quantities, consistent material planning and production setup can help control converting costs.
7. How Are Printed Thermal Till Receipt Rolls Manufactured?
Some retailers require thermal receipt rolls with pre-printed logos, promotional messages, return policies, or contact information.
For manufacturers supplying these products, printing can be carried out before slitting or integrated into the converting process.
Method 1: Printing Before Slitting
The jumbo thermal paper is printed using a separate flexographic printing press.
After printing, the jumbo roll is transferred to a thermal paper slitting rewinding machine.
The printed paper is then slit and rewound into finished thermal till receipt rolls.
This method allows printing and converting to operate as separate processes.
Method 2: Inline Flexo Printing and Slitting
A machine equipped with an inline flexographic printing unit can combine printing with the subsequent slitting and rewinding process.
The printing plate carries the required artwork, which is transferred onto the paper web during production.
For customised thermal receipt rolls, branding is commonly printed on the reverse side of the paper, leaving the thermal-sensitive coating available for transaction printing.
Before production, manufacturers should confirm printing orientation, ink compatibility, print repeat length, artwork registration, and drying requirements.
JOTA Machinery offers inline flexo printing and slitting configurations for manufacturers handling printed thermal paper orders.

Looking to manufacture custom-printed thermal receipt rolls? The JT-SLT-1400P combines flexographic printing, slitting, and rewinding in one production line. It supports branded POS rolls with logos, advertising messages, and other printed artwork, subject to the printing configuration. For manufacturers planning to add printing capabilities to their converting operations, JOTA can help evaluate the required printing colours, finished roll dimensions, and production specifications.
8. Choosing a Thermal Till Receipt Roll Making Machine
The correct thermal paper slitting rewinding machine depends on the manufacturer’s finished roll specifications, expected production volume, and available factory resources.
A business supplying smaller quantities of receipt rolls may have different equipment requirements from an established manufacturer supplying large wholesale orders.
Before purchasing machinery, the following information should be confirmed.
| Production Requirement | Information Needed |
|---|---|
| Jumbo Paper Width | Nominal and usable width |
| Jumbo Roll Diameter | Maximum outside diameter |
| Paper Specifications | GSM and caliper |
| Finished Roll Width | 57 mm, 79 mm, 80 mm or custom |
| Finished Roll Diameter | 40 mm, 80 mm, 83 mm or other |
| Core Specifications | Inner and outer diameter |
| Production Capacity | Expected output per shift |
| Printing Requirements | Plain or customised receipt rolls |
| Packaging | Manual or automated packaging requirements |
Automatic Thermal Paper Slitting Rewinding Machine
For manufacturers producing standard thermal till receipt rolls, an automatic slitter rewinder can provide a suitable converting solution, depending on the production requirements.
The machine should be selected according to the target finished widths, winding diameters, and required output.
Inline Flexo Printing Slitting Machine
For businesses producing branded receipt rolls, a machine combining inline flexographic printing and slitting may be appropriate.
The configuration should match the printing artwork, order volume, and required converting specifications.
Fully Automatic Thermal Paper Roll Production Line
Manufacturers handling larger orders may consider more extensively automated equipment to reduce manual handling and improve production flow.
The actual production capacity depends on the machine configuration, finished roll dimensions, material specifications, and operating conditions.
Machine selection should not be based on rated speed alone.
The most useful comparison is how the machine performs when producing your actual finished receipt roll specifications.
Need a Thermal Receipt Roll Production Solution?
If you’re planning to manufacture thermal till receipt rolls in South Africa, JOTA Machinery can help you review the required slitting and rewinding configuration.
Share your jumbo paper dimensions, paper GSM, finished roll specifications, and expected daily production with our engineering team.
We can recommend a suitable machine configuration based on your production requirements.
Explore JOTA Thermal Till Roll Making Machines
9. What Should Wholesale Buyers Check Before Ordering?
For wholesalers and distributors, the price per carton is often an important purchasing consideration.
However, comparing carton prices without checking product specifications can be misleading.
Two manufacturers may supply thermal till receipt rolls with the same nominal dimensions but different actual paper lengths, paper grades, or core specifications.
Before comparing quotations, buyers should confirm:
- Paper width and permitted tolerance
- Finished outside diameter
- Actual paper length
- Paper GSM and caliper
- Core dimensions
- Thermal print performance
- Plain or pre-printed specifications
- Rolls per pack or carton
- Storage and packaging requirements
For manufacturers, supplying complete technical information helps customers compare products correctly and reduces the risk of misunderstandings.
Where practical, provide finished roll samples for testing in the customer’s intended printer before beginning large-volume production.
Conclusion
Thermal till receipt rolls are established consumables used by South African businesses operating compatible POS and receipt printing equipment.
For manufacturers, the challenge is not simply converting jumbo thermal paper into smaller rolls.
Consistent product quality depends on paper selection, cutting accuracy, rewinding conditions, finished roll dimensions, and routine inspection.
A manufacturer planning to enter this market should first confirm which roll specifications potential customers require and how much production capacity is realistically needed.
Choosing the appropriate slitting and rewinding machine should follow those requirements.
Planning to Manufacture Thermal Till Receipt Rolls in South Africa?
JOTA Machinery supplies thermal paper slitting and rewinding machines for manufacturers producing POS receipt rolls, card machine rolls, and customised thermal till paper products.
Whether you’re starting a new converting business or expanding an existing production facility, our engineering team can help you review a suitable machine configuration.
Send us your jumbo paper specifications, finished roll dimensions, and expected daily production to discuss machine specifications and pricing.
Request a Thermal Till Receipt Roll Machine Quotation
Last Updated on 16/10/2026 by Jota Machinery