
Written by Bruce Zhou
Founder & Managing Director | JOTA Machinery
Paper converting machinery specialist since 2002.
Connect with me on LinkedIn
Published: 16,October, 2026
Last Updated: 16,October, 2026 18:00:59 PM GMT+8
Starting a thermal till roll manufacturing business in South Africa is not simply a matter of buying a paper cutting machine and finding customers.
Before investing in equipment, you need to understand which receipt paper rolls are sold locally, where to source jumbo thermal paper, how much production capacity you need, and whether your expected sales can cover the operating costs.

For many paper traders and distributors, the first question is whether it makes sense to continue importing finished till rolls or begin converting jumbo thermal paper locally.
Both business models have their advantages.
Importing finished rolls requires less production equipment, but it also means relying on external manufacturers for roll specifications, packaging, and production schedules.
Local converting gives you more control over the finished product. You can purchase jumbo thermal paper, slit it into the widths required by your customers, rewind the paper into smaller rolls, and arrange the finished packaging.
However, local manufacturing also brings responsibilities for machine operation, raw material inventory, quality control, maintenance, and customer delivery.
This guide examines what you should consider before starting a thermal till roll manufacturing business in South Africa.
1. Is Thermal Till Roll Manufacturing a Viable Business in South Africa?
Thermal till rolls are consumable products used in everyday commercial transactions.
Retail shops, supermarkets, restaurants, petrol stations, pharmacies, and businesses operating card payment terminals use thermal receipt paper in compatible printing equipment.
South Africa already has an established supply chain for these products.
Companies such as GSP Industries and Trello Paper Co. manufacture or supply thermal till rolls for the local market, including card machine rolls, POS receipt rolls, and custom-printed products.
The manufacturing opportunity is not necessarily producing thermal paper from wood pulp. For most new entrants, the more relevant business is converting purchased jumbo thermal paper into finished receipt rolls.
This distinction matters because manufacturing thermal-coated paper and converting thermal paper rolls require entirely different capital investments.
A thermal paper mill needs specialised paper coating and manufacturing equipment. A converting factory purchases thermal-coated jumbo rolls and processes them into smaller finished rolls.
Where Does the Business Opportunity Come From?
A local thermal till roll converter may supply several customer groups:
- POS equipment distributors and office consumable suppliers
- Till roll wholesalers and stationery distributors
- Independent retailers and supermarket groups
- Restaurants and hospitality suppliers
- Card payment terminal consumable distributors
- Customers ordering customised or branded receipt rolls
However, the fact that these businesses use receipt paper does not guarantee that they will purchase from a new manufacturer.
Established suppliers already compete in this market.
Before investing, contact prospective customers, obtain their required roll specifications, and ask about their current purchasing quantities and delivery expectations.
An order from a distributor buying regularly may be more valuable than occasional sales to many small shops.
The first investment should be in understanding your customers, not in purchasing the largest available machine.
2. Which Thermal Till Roll Sizes Should You Manufacture?
Different printers require different thermal receipt paper dimensions.
For South African manufacturers, 57 × 40 mm and 80 × 83 mm are two important sizes to investigate. Both appear in local supplier catalogues, although other sizes are also sold.
| Thermal Till Roll Size | Typical Application |
|---|---|
| 57 × 40 mm | Card payment terminals and compact receipt printers |
| 80 × 83 mm | Desktop POS receipt printers |
| 80 × 80 mm | Retail POS systems and receipt printers |
| 57 × 57 mm | Selected receipt printing equipment |
| Custom dimensions | ATMs, kiosks and specialised printers |
These dimensions generally refer to the paper width and finished roll outside diameter.
A 57 × 40 mm thermal roll is approximately 57 mm wide with a finished diameter of 40 mm. The designation does not specify its exact paper length.
For a new business, it may be better to begin with one or two sizes that have confirmed customers rather than manufacture every available specification.
Each additional product may require different production settings, paper cores, packaging materials, and inventory space.
Before deciding which rolls to manufacture, ask potential customers for the required paper width, outside diameter, core dimensions, paper GSM, and packaging quantity.
For a closer examination of local dimensions, read our guide: What Are the Most Common Thermal Till Roll Sizes in South Africa?
3. What Raw Materials Do You Need?
The primary raw material is a jumbo roll of thermal paper.
Unlike finished thermal receipt rolls, jumbo rolls are supplied in wide, large-diameter formats suitable for industrial converting machinery.
A thermal till roll factory generally needs three main categories of consumables.
Thermal Paper Jumbo Rolls
The first task is finding a reliable thermal paper supplier.
When requesting a jumbo roll quotation, confirm:
- Jumbo roll width and outside diameter
- Paper GSM and caliper
- Thermal coating performance
- Core dimensions
- Price per tonne or other agreed purchasing unit
- Minimum order quantity
- Shipping terms and delivery lead time
- Available product certifications or test documentation
Do not select material based only on the price per tonne.
Paper with inconsistent thickness, poor coating performance, or unsuitable winding characteristics can cause problems during slitting and rewinding.
It may also affect the finished roll length and print quality.
Request samples for production trials before placing a large raw material order.
Paper Cores
Some finished till rolls are wound onto paper cores, while certain applications use other core arrangements.
The core dimensions must suit the final printing equipment and the selected rewinding machine.

Manufacturers should confirm both the inner diameter and outer diameter rather than specifying only a nominal core size.
Packaging Materials
Finished rolls may be packed in bundles, wrapped packs, or cartons depending on the customer’s requirements.
Before purchasing packaging equipment, confirm how many rolls your distributors expect per pack or carton.
Packaging affects labour requirements, warehouse space, product handling, and the final selling cost.
4. What Machines Are Needed to Start a Thermal Till Roll Factory?
The main production machine is a thermal paper slitting rewinding machine, sometimes marketed as a thermal till roll making machine or POS roll making machine.
Its purpose is to convert wide thermal paper jumbo rolls into narrower finished rolls.
The suitable configuration depends on how many rolls you plan to manufacture, the sizes your customers require, and the level of automation you want.
Semi-Automatic Thermal Paper Slitter Rewinder
A semi-automatic machine may be an option for a new business looking to control its initial equipment expenditure.
Depending on the machine design, operators may perform more of the loading, unloading, roll handling, and changeover work manually.
This can reduce initial machinery costs, but labour and downtime must be considered when estimating production capacity.
Automatic Thermal Till Roll Making Machine
An automatic thermal paper slitting rewinding machine can support greater automation in the converting process.
It is suitable for manufacturers seeking more consistent production and reduced manual intervention in the functions covered by the selected model.
However, automatic operation does not mean that every production step, including packaging and palletising, is included.
Always examine the actual machine configuration before comparing quotations.
Inline Flexo Printing and Slitting Machine
Some customers require thermal till rolls printed with business logos, messages, or other artwork.
These products can be manufactured by printing the jumbo paper separately before slitting, or with a machine that combines inline flexographic printing, slitting, and rewinding.

Looking to manufacture custom-printed thermal receipt rolls? The JT-SLT-1400P combines flexographic printing, slitting, and rewinding in one production line. It supports branded POS rolls with logos, advertising messages, and other printed artwork, subject to the printing configuration. For manufacturers planning to add printing capabilities to their converting operations, JOTA can help evaluate the required printing colours, finished roll dimensions, and production specifications.
The appropriate method depends on order quantities, artwork changes, required print quality, and existing equipment.
Fully Automatic Thermal Paper Roll Production Line
For manufacturers handling larger order volumes, additional automation may be worth considering.
A production line can include automatic roll converting and, where specified, downstream processes such as wrapping, carton packing, or palletising.
Before selecting this option, compare the additional investment against realistic order volume and the labour savings that the equipment can provide.
Choosing a machine should begin with your required production output, not the highest advertised mechanical speed.
5. How Are Thermal Till Rolls Manufactured?
The production process can be divided into five main stages.
Step 1: Load the Jumbo Thermal Paper Roll
The parent roll is positioned on the machine’s unwind stand.
Large jumbo rolls may require suitable lifting or shaftless unwinding arrangements, depending on the roll weight and machine configuration.
The operator confirms that the paper is loaded correctly and that the material can unwind without excessive tension or misalignment.
Step 2: Set the Slitting Widths
The required cutting positions are established according to the finished roll specification.
On JOTA machines equipped with a lower slitter blade and spacer arrangement, operators select and install the appropriate blades and spacers along the knife shaft.
Changing from one product width to another requires checking the cutting arrangement and the position of the corresponding knives.
Correct blade positioning helps maintain consistent finished roll widths.
Step 3: Slit the Thermal Paper
The moving paper web passes through the slitting section.
The wide jumbo roll is divided into narrower webs according to the selected cutting layout.
Web alignment, knife condition, and material tension all influence the quality of the cut edges.
Step 4: Rewind the Finished Rolls
The slit paper is rewound to the required diameter or length, depending on the machine control system and production specification.
The rewinding process must maintain suitable tension as the roll diameter increases.
Operators should inspect finished roll width, diameter, edge alignment, winding tightness, and core placement where applicable.
Step 5: Pack the Completed Rolls
After rewinding and unloading, the finished rolls are prepared for packaging.
Depending on the production setup, this stage may involve manual packing, wrapping equipment, or additional automated handling machinery.
The completed products can then be packed and dispatched to wholesale customers or distributors.
6. How Much Does It Cost to Start a Thermal Till Roll Business?
There is no reliable single investment figure that applies to every thermal till roll factory in South Africa.
The total cost depends on machine automation, the number of finished roll sizes, expected production volume, raw material inventory, factory premises, and imported equipment costs.
A practical investment budget should separate initial capital expenditure from ongoing operating expenses.
| Cost Category | Items to Include |
|---|---|
| Machinery | Slitter rewinder, optional printing, packaging equipment |
| Raw Materials | Jumbo thermal paper, cores, packaging |
| Factory Setup | Rent, electrical installation, material handling |
| Shipping & Importation | Freight, customs clearance, applicable duties and taxes |
| Labour | Operators, packing staff, administration |
| Maintenance | Spare knives, consumable parts, servicing |
| Working Capital | Inventory, wages and costs before customer payments |
For an initial equipment budget, JOTA’s semi-automatic thermal paper converting machines may start at approximately USD 15,500, while more extensively automated configurations can require substantially greater investment.
These figures are indicative machinery references, not a current quotation or the complete cost of establishing a factory in South Africa.
For any proposed machine, request a formal quotation that clearly identifies the included equipment, optional functions, packing arrangements, delivery terms, and support scope.
Should You Import Finished Rolls or Manufacture Locally?
A distributor considering a converting factory should compare both business models using the same finished roll specification.
Importing finished rolls avoids buying production equipment, but carries costs for purchasing, shipping, warehousing, and distribution.
Local converting adds machinery, labour, maintenance, and raw material processing expenses.
Its potential advantages include control over finished specifications, production scheduling, and the ability to serve customers ordering different sizes.
Neither model is automatically more profitable.
The correct choice depends on the landed cost of raw material, achievable manufacturing efficiency, local selling prices, and the volume of confirmed orders.
7. How to Estimate Production Capacity and Profit
One of the most common mistakes is estimating finished roll production from a machine’s rated speed alone.
A slitter rewinder may operate at a specified web speed, but actual daily production also depends on cutting layout, finished roll length, changeovers, machine stops, and working hours.
Start With the Slitting Layout
Suppose a factory uses a 790 mm wide jumbo thermal paper roll and plans to manufacture 80 mm wide receipt rolls.
The theoretical width calculation is:
790 ÷ 80 = 9 complete widths, with 70 mm remaining.
This is only a preliminary layout calculation.
Actual usable width must account for edge trimming, knife positions, and machine-specific requirements.
Estimate Rolls Per Shift
A simplified production estimate is:
Finished Rolls = Number of Rewinding Positions × Effective Web Length Processed ÷ Length Per Finished Roll
For example, assume a hypothetical machine setup has:
- 9 usable rewinding positions
- 120 metres per minute of effective running speed
- 50 metres of paper in each finished roll
- 360 minutes of effective production time
The calculation is:
9 × 120 × 360 ÷ 50 = 7,776 finished rolls
This is an illustrative calculation, not the rated or verified production output of a JOTA model.
It assumes the stated effective time and speed are achievable and excludes additional production limitations not represented by those inputs.
Real output should be assessed using machine tests and the customer’s specified roll format.
Calculate the Cost Per Finished Roll
Once production output is estimated, calculate the manufacturing cost per roll.
Unit Manufacturing Cost = Total Production Cost ÷ Saleable Finished Rolls
Production cost should include the thermal paper consumed, cores, packaging, direct labour, electricity, waste, maintenance, and appropriate factory overhead.
You can then compare that figure against the expected selling price.
Gross Profit Per Roll = Selling Price − Cost of Goods Sold Per Roll
Be careful not to treat gross profit as net profit.
A factory still needs to cover financing, administration, distribution, taxes, and other business expenses.
Do not base a machinery investment on an advertised profit margin without checking actual customer prices and raw material costs.
Want to Estimate Your Own Production Capacity?
If you already know your jumbo roll width, target till roll sizes, paper GSM, and required daily output, JOTA Machinery can review these specifications and help identify a suitable slitting rewinding machine configuration.
Discuss Your Thermal Till Roll Production Requirements
8. Business Registration and Import Considerations in South Africa
A new manufacturing business must also consider the local administrative and regulatory requirements.
The applicable steps depend on the legal structure, premises, workforce, and import activities.
Company Registration and Tax
Businesses operating through a South African company generally need to register the relevant legal entity with the Companies and Intellectual Property Commission (CIPC).
Business owners should also confirm income tax and VAT obligations with the South African Revenue Service (SARS).
As of April 2026, SARS administers a compulsory VAT registration threshold of R2.3 million in taxable supplies over the relevant 12-month period, with voluntary registration available under qualifying conditions.
Registration requirements should be checked against current SARS guidance before trading.
Importing Machinery and Thermal Paper
Businesses importing equipment or jumbo thermal paper should check the applicable customs registration and documentation requirements.
The customs tariff classification affects duties and other import obligations.
Importers should confirm the correct classification for each product rather than assume thermal paper, finished receipt rolls, and converting machinery receive identical tariff treatment.
South Africa’s import VAT and customs rules should also be included in landed-cost calculations.
Factory Premises and Utilities
Before renting a workshop, confirm that the premises are suitable for the proposed manufacturing activities.
Consider electrical supply, access for delivery vehicles, material storage, roll handling, workplace safety, and the space required around machinery.
Where relevant, review local zoning, fire safety, occupational health and safety, and electrical installation requirements with qualified South African advisers.
9. Common Mistakes When Starting a Till Roll Manufacturing Business
Buying Machinery Before Finding Customers
A machine may be capable of producing thousands of rolls, but that capacity has little commercial value without consistent orders.
Speak with potential customers and obtain realistic purchasing requirements before committing to production equipment.
Choosing Jumbo Paper Only by Price
Lower-cost raw material can become expensive if the paper has inconsistent caliper, poor coating performance, or unsuitable winding characteristics.
Test the paper before committing to regular bulk purchases.
Ignoring Finished Roll Specifications
A difference in paper width, diameter, or core size can make a roll unsuitable for a customer’s printer.
Always confirm the complete product specification.
Confusing Mechanical Speed With Actual Output
Machine speed does not include every roll change, stoppage, maintenance task, or downstream packing operation.
Estimate production using realistic operating conditions.
Underestimating Working Capital
Manufacturers often pay for material and operating expenses before receiving payment from customers.
Plan inventory levels, payment terms, and cash reserves carefully.
Overlooking Quality Control
Inspect finished rolls consistently.
Paper width, winding condition, outside diameter, print performance, and packaging quality should be checked against the customer’s purchase specification.
10. Choosing the Right Manufacturing Equipment
The correct thermal till roll making machine depends on the business you plan to operate.
A company beginning with small wholesale orders may require a different solution from a converter already supplying supermarkets and national distribution networks.
At JOTA Machinery, we manufacture slitting and rewinding equipment for thermal paper converting, including configurations for automatic roll production and inline flexographic printing.
Before proposing equipment, our engineering team needs to understand the customer’s jumbo paper dimensions, finished roll specifications, and expected production volume.
For a South African business, equipment selection should also consider shipment arrangements, factory space, available power supply, and the practical requirements of machine operation.
Review the actual machine specifications, production videos, and factory testing arrangements before placing an order.
A properly selected machine should suit the products you intend to manufacture, rather than force your business to adapt to an unsuitable machine configuration.
Last Updated on 16/10/2026 by Jota Machinery