bruce-zhou-avator-600x600

Written by Bruce Zhou
Founder & Managing Director | JOTA Machinery
Paper converting machinery specialist since 2002.
Connect with me on LinkedIn
Published: 05,November, 2026
Last Updated: 05,November, 2026 15:20:38 PM GMT+8

A thermal paper converter needs to print a supermarket logo on the reverse side of a jumbo roll before converting it into 80 mm POS receipt rolls.

The logo must appear repeatedly along the paper web, with consistent ink coverage and the correct position within each finished roll width.

One way to carry out this operation is flexographic printing, commonly called flexo printing.

Anilox Cell Volume

Flexography uses a flexible relief printing plate mounted onto a rotating cylinder. An engraved anilox roller meters ink to the raised image areas of the plate, which then transfer the image directly onto the moving substrate.

The process is widely used for paper packaging, labels, corrugated board, flexible films and other roll-fed materials.

In thermal paper converting, a flexographic printing section can also be incorporated into a slitting and rewinding line, allowing fixed artwork to be printed before the jumbo roll is converted into finished receipt rolls.

To understand how the process works, it is necessary to examine the printing plate, anilox roller, ink supply system, impression cylinder and the interaction between these components.

What Is Flexographic Printing?

Flexographic printing is a direct rotary relief printing process that uses flexible printing plates to transfer ink onto a substrate.

The word relief refers to the physical structure of the printing plate.

The image areas are raised above the non-printing areas. Only the raised areas are intended to receive ink from the anilox roller and transfer it to the substrate.

The plate is mounted onto a rotating plate cylinder or sleeve, allowing the same image to be printed repeatedly as the material travels through the press.

Common substrates include paper, paperboard, plastic film, foil and other materials suitable for the selected printing system.

Flexographic printing can reproduce:

  • Company logos and brand graphics
  • Fixed text and linework
  • Solid spot-color areas
  • Halftone images and gradients
  • Multicolor artwork
  • Fixed printed barcodes and other repeated information

The ink, plate, anilox engraving and drying system must be selected according to the artwork and substrate.

The Five Main Components of a Flexographic Printing Unit

Although flexographic presses have different mechanical configurations, the underlying printing process uses the same basic ink-transfer principle.

1. Ink Supply System

The ink supply system delivers printing ink to the anilox roller.

Two common arrangements are an open ink pan with an ink applicator or fountain roller, and an enclosed chambered doctor blade system.

In an open system, ink may be transferred from an ink pan to the anilox using a fountain roller.

In a chambered system, ink is supplied directly to an enclosed chamber in contact with the anilox surface.

The appropriate design depends on the press configuration and ink system.

Ink viscosity, circulation and cleanliness are important because changes in ink condition can affect transfer and printed color.

2. Anilox Roller

The anilox roller is the principal ink-metering component of a flexographic printing unit.

Its surface contains microscopic engraved cells that carry a nominal volume of ink.

Modern anilox rollers commonly use a laser-engraved ceramic surface.

Two specifications are especially important:

Line Screen (LPI): The number of engraved cell lines per linear inch.

Cell Volume (BCM): The nominal ink-carrying capacity per unit area.

The line screen and cell volume are selected according to the required ink film, image detail and ink properties.

For example, a large solid logo may require a different anilox engraving from a fine halftone image.

A higher BCM can increase the ink available for transfer, but the actual ink film also depends on cell geometry, ink formulation and printing conditions.

3. Doctor Blade

The doctor blade removes excess ink from the non-engraved surface of the anilox roller.

In a doctor-bladed system, this leaves the ink contained principally within the engraved cells for transfer to the printing plate.

A chambered doctor blade assembly normally includes a metering blade and a containment blade, with suitable end seals.

doctor blade

Incorrect blade installation, wear, contamination or unsuitable loading can contribute to inconsistent ink metering and printing defects.

Not every historical or basic flexographic inking arrangement uses the same blade configuration, so the actual metering system should be identified from the machine design.

4. Plate Cylinder and Flexographic Printing Plate

The plate cylinder carries the flexible printing plate.

The printing plate is commonly manufactured from photopolymer material, although rubber plates are also used in certain applications.

Its raised image areas form the artwork that will be printed.

The anilox roller delivers ink to these raised surfaces.

During printing, the plate rotates into contact with the moving substrate and transfers the inked image.

The printing plate is normally mounted using an appropriate double-sided mounting tape, adhesive system or sleeve arrangement.

Plate alignment, thickness, surface structure and mounting quality affect printing performance.

5. Impression Cylinder

The impression cylinder supports the substrate as it passes through the printing nip.

It provides the backing against which the inked printing plate contacts the substrate.

The plate-to-substrate impression must be adjusted to achieve sufficient ink transfer without unnecessarily deforming the plate.

Too much impression may cause excessive dot gain, halos or dirty printing.

Insufficient impression may produce weak or incomplete ink transfer.

This is why flexographic press operators aim to establish the minimum effective impression, commonly called kiss impression.

How Does Flexographic Printing Work Step by Step?

The printing mechanism can be described as:

Ink Supply → Anilox Ink Metering → Printing Plate → Impression Nip → Printed Substrate

The complete production process also includes plate preparation, ink drying and any required finishing operations.

Step 1 — Prepare the Artwork and Printing Plate

The customer artwork is prepared for the required printing colors and repeat length.

For a single-color logo, one printing plate may be sufficient.

For multi-color printing, separate color separations are prepared for the respective printing stations.

The prepress department also checks image orientation, plate repeat, registration requirements and the position of the artwork on the web.

printing plate roller

The printing plate is then prepared using a suitable plate-making system.

The processed plate contains raised image areas corresponding to the required design.

Step 2 — Mount the Printing Plate

The flexible plate is mounted onto the plate cylinder or sleeve.

The correct mounting position is important because errors can affect image placement and color registration.

On a multi-color press, the plates for the individual colors must be mounted according to the intended relationship between the printed separations.

The plate and mounting tape combination must also suit the artwork and printing conditions.

Step 3 — Prepare the Printing Ink

The operator prepares the ink according to the ink supplier’s technical instructions.

The requirements depend on whether the system uses water-based, solvent-based or UV-curable flexographic ink.

Relevant parameters may include viscosity, pH, solvent balance, temperature or curing characteristics.

The ink must also be compatible with the printing plate and substrate.

Step 4 — Supply and Meter the Ink

Ink enters the anilox cells through the ink supply system.

The doctor blade, where fitted, meters the anilox by removing excess ink from its surface.

The engraved cells retain a controlled quantity of ink.

As the anilox rotates, a portion of the ink transfers onto the raised image areas of the printing plate.

The anilox specification establishes the nominal ink supply, while actual ink transfer depends on the entire printing condition.

Step 5 — Transfer the Image to the Substrate

The inked printing plate rotates into contact with the moving paper or film.

The impression cylinder supports the substrate during this contact.

Ink transfers from the raised image areas directly onto the substrate surface.

As the cylinder continues to rotate, the same image is repeated according to the printing repeat.

This direct plate-to-substrate transfer is a defining characteristic of flexography.

Step 6 — Dry or Cure the Ink

After printing, the ink must reach the required dried or cured condition before further processing.

Water-based and solvent-based systems commonly rely on evaporation under controlled drying conditions.

UV-curable inks require a suitable curing system.

The selected method must be compatible with the substrate and ink formulation.

For thermal paper, the drying process requires particular attention because excessive heat or unsuitable solvents can affect the recording layer.

Step 7 — Rewind or Continue to Converting

After printing and drying, the substrate may be rewound for a separate finishing operation.

Alternatively, it may continue through an inline production line.

For thermal paper receipt rolls, the downstream operations can include slitting, rewinding, roll handling and packaging.

The exact process sequence depends on the machine configuration.

Why Is It Called Flexographic Printing?

The term flexographic refers to the flexible nature of the printing plate.

Unlike traditional rigid metal relief plates, flexographic plates can bend around a cylindrical surface.

Historically, flexographic printing made extensive use of rubber printing plates.

Modern industrial flexography commonly uses photopolymer plates designed for particular printing applications.

Flexible Plate Construction

Photopolymer plates contain a light-sensitive polymer material.

During plate making, the image is formed so that the printing elements remain raised above the non-printing areas.

The finished plate has sufficient flexibility to be mounted around a printing cylinder or sleeve.

Elastic Deformation During Printing

The printing plate is resilient and can undergo controlled deformation at the printing nip.

This characteristic allows flexography to be used on a wide range of substrate surfaces.

However, plate deformation must be controlled.

Excessive impression can enlarge printed halftone dots, distort fine lines or produce unwanted ink transfer.

The plate’s hardness, thickness, relief structure and mounting tape must therefore suit the printing job.

Does Flexographic Mean Flexible Packaging?

No.

Flexographic printing refers to a printing process using flexible relief plates.

Flexible packaging refers to a category of packaging materials that can bend or deform, such as films, pouches and laminates.

Flexography is widely used to print flexible packaging, but it is not limited to flexible materials.

It can also print paperboard and corrugated packaging.

The word flexible refers to different properties in these two terms.

Flexographic Printing vs Offset Printing

Flexography and offset lithography use different image-transfer principles.

Flexography is a direct relief printing process.

Conventional offset lithography is an indirect planographic printing process in which the image is transferred through a blanket.

FeatureFlexographic PrintingOffset Lithographic Printing
Printing principleDirect relief printingIndirect planographic printing
Printing plateFlexible photopolymer or rubber plateLithographic printing plate
Image structureRaised printing areasImage and non-image areas are approximately in the same plane
Ink transferAnilox → plate → substratePlate → blanket → substrate
Main ink meteringEngraved anilox rollerOffset ink train
Common applicationsPackaging, labels, corrugated board, films, roll-fed materialsCommercial printing, publishing, cartons and packaging
Roll-fed operationCommonAlso available on web offset presses

Why Is the Ink-Transfer Method Different?

In flexography, the anilox roller meters a controlled ink film directly onto the raised printing areas of the plate.

The plate then prints directly onto the substrate.

In offset lithography, the image is first transferred from the plate to a rubber blanket and then from the blanket to the substrate.

Offset printing uses a different plate-imaging and ink-transfer system.

Both technologies can produce high-quality printing, but their suitability depends on substrate, artwork, run length, equipment and production requirements.

What Types of Flexographic Printing Presses Are Available?

Flexographic printing equipment can be built in several mechanical arrangements.

Three established architectures are inline, stack and central impression presses.

Inline Flexographic Press

In an inline flexographic press, printing stations are arranged sequentially along the web path.

The substrate travels from one printing unit to the next.

Inline flexography is commonly used in label and converting applications, and it can be combined with suitable downstream operations.

For example, an inline printing section can be incorporated into a thermal paper slitting and rewinding line.

Stack Flexographic Press

A stack press arranges printing units vertically or in another stacked arrangement.

Depending on the machine design, the substrate passes through the appropriate printing decks.

Stack presses are used in various packaging and web-printing applications.

Central Impression (CI) Flexographic Press

A central impression press uses a large common impression cylinder supporting the substrate through several printing stations.

The printing units are positioned around the central cylinder.

The arrangement can provide stable web support for multicolor printing, particularly on certain flexible film applications.

These press architectures should not be confused with individual mechanisms for opening, mounting or servicing printing units.

The correct press configuration depends on the printing application and production requirements.

What Can Flexographic Printing Be Used For?

Flexography is used across several printing and converting industries.

Paper Packaging

Flexographic printing is commonly used for paper bags, wrapping materials, corrugated packaging and other printed paper products.

The ink system and plate must be selected according to the substrate surface and required artwork.

Labels and Flexible Films

Flexo presses print product labels, flexible packaging films and other materials.

These applications may require spot-color printing, fine halftones or multicolor process printing.

Surface treatment, ink adhesion, drying or curing, and registration are important requirements.

Thermal Paper Receipt Rolls

Flexography can apply repeated fixed artwork to suitable thermal paper grades before the web is slit and rewound into finished receipt rolls.

The printed design may include a company logo, advertising text, decorative graphics or a fixed barcode.

The printing operation must preserve the thermal paper’s recording performance.

Kraft Paper Tape

Flexographic printing can also apply logos, product information or branding to suitable kraft paper tape surfaces.

The printing position depends on whether the tape is printed before or after other coating or reinforcement operations.

Ink compatibility must be checked against the actual paper, adhesive and production process.

How Is Flexographic Printing Used in Thermal Paper Roll Manufacturing?

Consider a manufacturer producing custom-branded 57 mm and nominal 80 mm thermal receipt rolls.

The company purchases thermal paper jumbo rolls and needs to print a repeated company logo on the reverse side before converting them into finished rolls.

One production arrangement is:

Thermal Paper Jumbo Roll → Unwinding → Inline Flexographic Printing → Ink Drying → Slitting → Rewinding

The printed paper web may contain several repeated artwork lanes across the jumbo-roll width.

The slitting knives then divide the web into the required finished roll widths.

Artwork Layout and Printing Repeat

Before production, the artwork must be arranged according to the web width and finished-roll layout.

The printing repeat determines how frequently the image appears along the web.

The printing plate and cylinder configuration must support the specified repeat.

Ink Selection

The ink must be compatible with the selected thermal paper.

For many receipt roll applications, branding is printed on the reverse side rather than directly onto the heat-sensitive recording surface.

However, the actual printing side and ink system must be verified for the specific paper grade.

Some thermal media are topcoated, while others have different coating structures and surface characteristics.

A printing ink suitable for one grade may not perform correctly on another.

Drying Conditions

The printed ink must be sufficiently dried or cured before the paper is rewound.

Incorrect drying can cause set-off, blocking or contamination of adjacent layers.

Excessive thermal exposure may also produce unwanted discoloration of the heat-sensitive coating.

The drying conditions should be qualified using the intended ink and thermal paper.

Slitting and Rewinding

After printing, the web is slit into narrower strips.

Slitting width is determined by the knife positioning system, not by the flexographic printing plate.

The artwork lanes must be aligned with the cutting positions.

Correct color registration does not automatically guarantee correct print-to-slit alignment.

The rewinding system then produces finished receipt rolls according to the required dimensions.

Fixed Printing vs Variable Data Printing

A flexographic plate reproduces fixed artwork repeatedly.

If the manufacturer needs different barcodes, batch numbers or other variable information on individual rolls, a suitable variable-data printing system may be required.

An industrial inkjet coding unit can serve that separate purpose, depending on the equipment configuration.

Flexographic printing and variable-data coding should not be treated as the same process.

How Is Flexographic Printing Used in Kraft Paper Tape Manufacturing?

Water-activated kraft paper tape may be printed with customer logos or other fixed branding.

For example, a manufacturer might produce reinforced gummed paper tape with a repeated company logo printed along the roll.

Flexographic printing is suitable for applying this type of repetitive artwork when the ink and substrate are compatible.

The manufacturing route may include kraft paper preparation, reinforcement where required, printing, adhesive coating, drying, slitting and rewinding.

However, the exact printing position depends on the tape construction and machine design.

The sequence should not be assumed to be identical for reinforced and non-reinforced tape.

Printing on Kraft Paper

Kraft paper is a fibrous, absorbent substrate.

Its surface properties influence ink penetration, spreading and printed color strength.

The anilox volume and ink formulation must be selected according to the required coverage and detail.

Printing and Adhesive Compatibility

For water-activated tape, the printed design must be compatible with the starch-based adhesive system and downstream processing.

Ink drying and the intended printing side are important.

The manufacturer should confirm that the printing process does not interfere with adhesive coating, reinforcement bonding or the finished tape’s required properties.

Inline Printing with Converting Equipment

A compatible flexographic printing unit may be incorporated into a roll-to-roll production line.

For applications requiring repeated logos, inline printing can combine artwork application with suitable downstream converting operations.

The actual production route should be established from the equipment configuration and tape specifications.

What Determines Flexographic Print Quality?

Several variables affect the printed result.

Anilox Engraving

The cell volume, line screen and geometry influence the available ink film.

A suitable anilox provides the required color strength without excessive ink deposition.

Printing Plate and Mounting

Plate construction, imaging, relief structure and mounting tape influence image transfer and reproduction.

Fine halftones require different considerations from large solid areas.

Impression Settings

The anilox-to-plate and plate-to-substrate impression settings should be adjusted according to the press manufacturer’s procedure.

Excessive impression can produce dot gain and image distortion.

Ink Properties

Viscosity, color strength, wetting, adhesion and drying or curing characteristics must suit the substrate and printing conditions.

Web Handling

Stable web tension and tracking are important for continuous printing.

Unstable web handling can affect registration and print position.

Color Registration

Multicolor printing requires the individual color separations to align correctly.

Register marks and the applicable register adjustment system help operators monitor and correct color positioning.

Drying and Curing

The printed ink must reach the required dried or cured condition before further processing.

The drying method must also be appropriate for the substrate.

Common Flexographic Printing Defects

Print DefectPossible CausesInitial Checks
Weak solid ink densityInsufficient effective ink transfer or weak ink color strengthAnilox volume, ink, impression
Dirty or heavy printingExcessive ink film or impressionAnilox, plate, doctor blade
Pinholes in solid areasPoor wetting, contamination or incomplete transferInk, substrate, anilox, plate
Excessive dot gainExcessive impression or ink depositionPlate, mounting tape, BCM
Missing fine detailsInadequate plate reproduction or ink transferPlate, anilox, impression
Color misregistrationIncorrect plate mounting or unstable web conditionsRegister marks, tension, drives
Uneven print densityInconsistent metering or impressionDoctor blade, anilox, plate
Ink set-offInadequate drying or excessive ink filmInk, dryer, winding conditions
Inconsistent print repeatPlate, cylinder or drive-related problemRepeat length, mounting, mechanical condition

The visible defect should be used as a starting point for diagnosis.

For example, a light printed logo does not automatically mean that a higher-volume anilox is required.

The existing roller may be plugged, the ink may be outside its recommended condition, or the plate impression may be incorrect.

The cause should be identified before changing the machine settings.

What Information Is Needed Before Selecting a Flexographic Printing Machine?

The printing machine should be specified according to the actual product and printing requirements.

RequirementInformation to Confirm
SubstrateThermal paper, kraft paper, film or another material
Web widthIncoming jumbo-roll width
Printing colorsNumber of spot or process colors
ArtworkPrint-ready graphics and color separations
Printing repeatRequired repeat length
Ink systemWater-based, solvent-based or UV, as applicable
AniloxSuitable LPI, BCM and engraving
Printing plateMaterial, thickness and screen ruling
Print qualityColor, registration and image requirements
DryingInk requirements and substrate limitations
Downstream convertingSlitting, rewinding or other operations
Finished productRequired widths, diameters and winding direction

For thermal paper and kraft paper tape applications, the substrate and downstream process should be confirmed before the final printing configuration is selected.

Conclusion

Flexographic printing is a direct rotary relief printing process that uses a flexible printing plate to apply ink to a substrate.

The anilox roller meters ink, the raised image areas of the plate carry the artwork, and the impression cylinder supports the substrate during printing.

Its flexible plate construction and continuous rotary operation make it suitable for many paper and packaging applications.

For thermal paper and kraft paper tape manufacturers, flexographic printing can also be incorporated into compatible roll-to-roll production lines.

However, the printing result depends on the correct combination of ink, plate, anilox, impression, drying and substrate.

JOTA Machinery provides roll-to-roll converting equipment with optional inline flexographic printing configurations for suitable thermal paper and kraft paper tape applications.

For a new printing and converting project, the appropriate machine configuration should be established from the artwork, required colors, substrate specifications, printing repeat and finished-roll requirements.

CTA: Explore JOTA’s Inline Flexographic Printing Solutions

Last Updated on 05/11/2026 by Jota Machinery

Scroll to Top