JT-FPT-650 Paper Straw Flexographic Printing Machine

Print Beautiful Patterns On Paper Straws
  • Max. Printing Speed 120m/min
  • Printing Color 2-5
  • Max. Web Width 650mm
  • Max. Printing Width 640mm
Item

JT-FPT-650 paper straw flexographic printing machine

Printing speed

120m/min

Printing color

2-5

Max. web width

650mm

Max. printing width

640mm

Max. unwinding diameter

1000mm

Max. rewinding diameter

1000mm

Printing length

175mm-320mm

Power

11.5Kw

Paper Thickness

60gsm-250gsm

Precision

±0.10mm

Voltage

380V/50Hz, 3 phase, 4 wire

 

Hydraulic loading system.
Ceramic anilox roller transfers the ink, long life, wear resistance, corrosion resistance, reduce the number of times to replace the anilox roller, highly improve the printing efficiency.
Each printing unit adopts 360-degree plate adjustment, which can be synchronized or separated, which enables other printing units to continue printing.
An automatic web-guiding system is installed in front of the printing unit, it ensures the material always in the right position. (standard configuration)
Pneumatic brake and precision regulator for unwinding tension control, tension sensor detects real-time tension.
Unwinding shaft is 3’’ (76mm) air expanding shaft.
A video inspecting system is optional, it can inspect the printing quality when the machine is running at high speed.
Each printing unit is equipped with a set of infrared drying devices.
When the machine stops, the fountain cylinder and anilox roller separate from the ink tray, rotate at low speed, avoids ink from drying.
Rewinding shaft is 3’’ (76mm) air expanding shaft, back-to-back rewinding, hydraulic finished reel discharging.
Continuously complete paper feeding, printing, automatic infrared drying, and rewinding.

JT-FPT-650 Paper Straw Flexographic Printing Machine

JT-FPT-650 paper straw flexographic printing machine can be applied to print beautiful and attractive logos, graphics, photos on paper drinking straws.

As you could see in the following photo, paper straw is generally made by 3 layers of biodegradable paper, those papers are with different width and thickness.

paper-straw-production-line-21

Beautiful patterns, photos, pictures, logos are printed on the layer A (outside), layer A adopts 60gsm printable and biodegradable paper. It is hard to realize printing on 15mm width paper, so patterns are initially printed on the straw paper jumbo roll.

After the straw paper jumbo roll is printed with desired elements, it will be loaded to a straw paper slitting rewinding machine. Slitting rewinding machine cuts the printed straw paper jumbo roll into many 15mm width small rolls.

JT-SLT-650-Slitter-Rewinding-Machine-1

Straw Paper Slitting Rewinding Machine

You could check the following photo to understand more about the paper straw production process.

paper-straw-production-line-2

Talkback to the JT-FPT-650 flexo printing machine.

This JT-FPT-650 flexographic printing press equips with hydraulic jumbo roll loading function, which means you can easily load straw paper jumbo roll without wasting too much energy, and its loading capacity is much higher to support large-weight jumbo roll.

Paper-Straw-Flexographic-Printing-Machine-9

Hydraulic Jumbo Roll Loading/Unwinding Stand

Tension control is always an important part of printing equipment, and JT-FPT-650 also pays great attention to the design of tension control.

For this reason, tension load cell sensor, tension controller, and air brake are introduced in the unwinding part of the JT-FPT-650 flexographic machine.

Paper-Straw-Flexographic-Printing-Machine-6

Tension Controller

Paper-Straw-Flexographic-Printing-Machine-10

Tension Load Cell Sensor

In order to avoid paper feeding’s position shift, the JT-FPT-650 flexo printing machine is equipped with a position sensor and an edge position controller (EPC) system to ensure that the material enters the printing station precisely, according to the designed tracks and route.

Paper-Straw-Flexographic-Printing-Machine-7

Edge Position Controller (EPC)

Paper-Straw-Flexographic-Printing-Machine-8

Position Sensor

Now straw paper comes to the printing station. As you could see in the following photo for reference, the JT-FPT-650 flexo printing machine installs all the necessary components to realize a better flexo printing effect.

Paper-Straw-Flexographic-Printing-Machine-5

The ink is transferred from ink tray to fountain cylinder, anilox roller, plate cylinder, then the impression cylinder is pressed on the plate cylinder, and the pattern is printed on straw paper.

When the ink transfer effect of the anilox roller becomes poor, the doctor blade can automatically scrape off the excess ink on the anilox roller, so that the ink transfer effect of the anilox roller is always guaranteed.

After the pattern is printed on straw paper, the ink is still wet, if the ink is not dried in time, the ink will inevitably spread on the straw paper.

With this in mind, the designer of JT-FPT-650 added an infrared drying device to the machine, ensures that the ink can be dried as soon as possible without affecting the final printing effect.

Paper-Straw-Flexographic-Printing-Machine-11

Infrared Drying Device

After reading here, you may still have some more questions about this flexo printing machine. You are welcome to send an inquiry on our website.

In order to let you know more about we Jota company, please watch the following video for reference.

We Jota could also supply following related machines, if you are also interested in any type, please feel free to send us an inquiry:

  1. Thermal Paper Slitting Machine
  2. Plastic Film, Fabric, Aluminum Foil Slitting Rewinding Machine
  3. Paper Sheeter
  4. Paper Tube Making Machine
  5. Label Die Cutting Machine
  6. Flexo Printing Machine
  7. Cardboard Tube Cutting Machine