Advanced slitter rewinder than the traditional version

  • A slitter rewinder suitable for gummed paper tape
  • Automatic tucker technology for quickly rewinding
  • Single shaft rewinding increase the output efficiency
  • Integrate the tail cutter and water spraying device
Get an Instant Quote

Jota Slitting Rewinding Machine

If you are looking for a  suitable jumbo roll slitting rewinding machine whether you are in the field of printing, packaging, new energy, aerospace, or new carbon fiber technology materials.

Our professional team could meet your requirement to providing a suitable solution on slitting rewinding machine.

As a professional jumbo roll slitting rewinding machine manufacturer, we have not only 20 years of experience, but also a highly educated R&D team, advanced mechanical design team, and electrical software design team.

These can ensure that our slitting rewinding machine can meet customer needs and conform to the market requirement.


At the same time, our company is also completing its own upgrading and transformation.

From the most basic paper and film roll slitting rewinding machine to the latest new energy carbon fiber and the slitting of aerospace materials, this is also a testimony of our own strength.

Currently, we can provide slitting machines for various materials.

The width of parent mother rolls can reach from 50mm to 3500mm, and the slitting width can range from 3mm to 3500mm.

There are various winding methods such as reverse winding, disc winding, and rewinding. The maximum diameter can be up to 1800mm. There are also various slitting models for you to choose from.

Many people have a misunderstanding about the slitting rewinding machine.

You think that it is to find a simple machine to cut large rolls into small rolls or rewind them into small rolls.

In fact, different material characteristics, hardness, tension requirements, and subsequent processes are different.

The requirements vary greatly.

For each different material, the material threading flowing route on the machine, the angle between the roller and the diameter of the roller, and the selection of the slitting knife are all professional technical issues.

If you are looking for a professional jumbo roll slitting rewinding machine supplier, Jota Machinery should be your best choice.

Jota slitting rewinding machine could be applied for many different materials,

such as adhesive labels, kinds of paper, film, foil, non-woven fabric, CFRP, CFRTP, FRP prepreg, etc.

For a deep discussion about Jota slitting rewinding machine, please just send us an inquiry.

CFRP, CFRTP, FRP Prepreg UD Tape Slitting Rewinding Core Technology

Jota Machinery: Original Slitting Rewinding Machine Manufacturer in China

Jota is capable of manufacturing 30 sets of slitting rewinding machines in 1 month.

We also accept free material converting test, you just need to send some of your material to us.

we will use our Jota slitting rewinding machine test it, then show you the testing video.


Water Activated Tape Slitter Rewinder

  • Neat edges without damaging the fiberglass
  • Fully automatic conveying shrink film packaging line
  • Comply with European safety production standards
  • Optional inline flexographic printing unit
Offline debugging service

Installation and operation user manual, wire connection diagram, tension controller guide.

Installation and operation video tutorial.

One-on-one remote video call assistance.

On-site installation and operation guidance.

What's the delivery time?

Around 30-45 days, mainly depends on machine type.

Could you help us to buy other goods?

Sure, it is our honor to work for you.

If the machine's spare parts are broken, where could I get?

We will offer you some parts as backup, in case any part is broken within one year, we will sent you for free.

Could you tell us your client’s contact for us to checking machine on site?

Sure, if we have client in your country, we will offer.

Contact Our Support Team

Water spray nozzle device

In every printing factory, one or more thermal paper slitting machines are typically equipped to produce small rolls of thermal paper.

These machines operate at high speed and stability in continuous production cycles, thanks to the installation of automatic cutting and automatic gluing devices on each machine and significantly enhancing production efficiency.

tail cutter and gluer

In the early years, the production of thermal cash register till rolls lacked automatic cutting and gluing devices, and the sealing process was entirely dependent on manual operations.

Workers had to manually apply glue to the cutting ends or use double-sided tape for sealing. This manual operation was highly inefficient, time-consuming, labor-intensive, and made it difficult to ensure the quality of the seals.

With the development of automation technology, the advent of automatic tail cutting and gluing devices greatly improved production efficiency.

The introduction of automated equipment increased the speed of each production cycle by about 10 seconds, significantly shortening production time and boosting capacity.

Despite the significant increase in production efficiency brought about by the automatic gluing devices, some issues arise in practical applications.

For example, sometimes the amount of glue extruded is inappropriate, leading to excess glue spilling onto the machine’s work surface and affecting normal production.

To address this issue, Jota  Machinery introduced an automatic gluing device with a dot dispensing mode. Unlike the traditional spraying method, the dot dispensing mode extrudes glue in dots rather than lines or surfaces. This design offers several advantages:

Reduced Glue Usage: The dot dispensing method is more precise, effectively reducing glue wastage.

Increased Efficiency: By reducing excess glue spillage, the time required for machine cleaning and maintenance is also reduced, further enhancing production efficiency.

Improved Seal Quality: Dot gluing can distribute glue more evenly, improving the quality and consistency of the seals.

The improvement and optimization of equipment is an ongoing process. Engineers at Jota Machinery continuously strive to provide more efficient and reliable solutions for customers through technological innovation and improvement.

One of our German customers learned that we have a slitting machine for water activated kraft paper tape from Google.

paper tape slitter rewinder

Their company ordered one set of 1400mm width slitter rewinder and asked us to add an automatic water spray nozzle device.

Thus, the latest intelligent kraft paper tape slitting machine in 2024 was born.

Application of Automatic Water Spray Nozzle Devices on Water-Activated Kraft Paper Tape

Water-activated kraft paper tape is coated with a starch-based adhesive that remains non-sticky after high-temperature drying.

As a professional supplier of water-activated kraft paper tape equipment, Jota Machinery developed a dedicated water spray nozzle device for this type of tape.

When exposed to water, the water-activated kraft paper becomes highly adhesive, enabling our spraying device to effectively activate the tape’s adhesiveness during production, thus achieving efficient sealing and bonding.

This upgraded spraying device consists of the following core components:

  1. Water Tank: Stores the water for spraying, ensuring ample water supply during production.
  2. Precision Pressure Regulator: Controls the water flow pressure, ensuring an even and stable spray.
  3. Pneumatic Pressure Regulator: Adjusts the amount of spray through air pressure, ensuring fine control of the mist.
  4. Two Spraying Devices: Serve different spraying needs, one for sealing the terminals and the other for bonding the inner terminals and the paper core.

The major advantage of this structural design is that the sprayed water forms a mist, which does not negatively impact the product surface or interfere with the work surface operations. Specific applications are as follows:

Terminal Sealing: The front-end spray head is responsible for spraying mist to activate the adhesiveness of the tape terminals, achieving sealing.

Bonding Inner Terminals and Paper Core: The rear-end spray head is used for spraying mist to bond the inner terminals and the paper core. This design enhances the overall quality and bonding strength of the product.

The development of science and technology often involves solving one problem and encountering new challenges.

Engineers at Jota Machinery persist in continuous innovation and optimization to provide the most perfect solutions for customers.

We understand that only by constantly improving technological levels and equipment performance can we truly meet customer needs and drive industry progress.

Scroll to Top